Surface profile measuring instrument CE3014N qVB

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The surface contour measuring instrument CE3014N qvbThe measuring principle of this instrument is the Cartesian coordinate measurement method, which measures the coordinate points of the surface contour of the measured part through X-axis and Z1 axis sensors. The coordinate point data measured by the sensors is transmitted to the upper PC through electrical components, and the software performs mathematical operations on the collected raw coordinate data to annotate the required engineering measurement items.

Product Details

Surface profile measuring instrument CE3014N qVB

measurement function

Dimensions: including horizontal distance, vertical distance, linear distance, radius, diameter

Angle: including horizontal angle, vertical angle, and angle

Position tolerance: including parallelism and perpendicularity

Shape tolerance: including straightness, convexity, and arc

Contour assisted generation: including auxiliary points, auxiliary lines, and auxiliary circles

measurement range

project	measurement range	resolution
sensor	30mm	0.02Mm
drive	120mm	0.1Mm
column	420mm	-

Technical specifications

Technical specifications	Z1Axial accuracy1	≤±（0.8+\|0.05H\|(m)m
	arc2	≤±（2+R/8(m)m
	angle3	≤±2′
	straightness4	≤0.5Mm/100mm
Motion Control	XAxis drive mode	electric
Motion Control	ZAxis drive mode	electric
measure speed	contourmeasure speed	0.1-0.5mm/s

Note:1TheHMeasure the height for;2The2mm＜R＜10mmThe standard sphere has a sampling arc angle of120°；3、60°90The angle block is in degrees, and the sampling length of the corner edge is5mm；4λcfor2.5mmMeasurement speed ≤0.3mm/sMeasure flat crystals;5The above parameters are all within20℃±2℃, step temperature not exceeding2℃/hMaximum ground vibrationRMS＜50Hz 2.5Mm/sandRMS＞50Hz 5.0Mm/sMeasured in the environment.

Instrument configuration

Component Name	Specification number	quantity
ASeries digital contour sensor	C-Sen-D-A2	1 set
Standard driver	C-Dri-b1	1 set
Standard column	C-Col-b1	1 set
Integrated ergonomic machine	C-Iw-b1	1 set
Electrical system	1800-D3	1 set
CASContour instrument acquisition and control system	CAS	1 set
Standard adjustment table	CP-BR-150	1 set
Precision sine flat pliers	fq-4	1 set
computer	CP-a1	1 set
printer	PR-a1	1 set
standard parts	gauge blockStandard ball	1 set
Single section measuring needle measuring rod4*32	D-4-32-17	1 set
toolbox	Tb-10	1 set

Environmental Requirements

There should be no dust, vibration, noise, airflow, corrosive gases, or strong magnetic fields around the indoor area that affect the measurement

Zhenyuan：Ground vibration MAXRMS：＜50HZ 2.5Mm/s /＞50HZ 5.0Mm/s

power supply：AC 220V±10% 50HzSeparate ground wire

Power demand:500W

Temperature:20±2The temperature gradient should not exceed ℃1℃/h

relative humidity30%-60%(No condensation)