Surface grinder magnetic separator supplier

NegotiableUpdate on 06/22

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The chain and wire mesh of the magnetic separator transmission mechanism of the surface grinder form a certain depth of the liquid pool. The filter cloth is laid on the chain and wire mesh. When the contaminated liquid carrying impurities flows through the water flow buffer device to the non-woven fabric during operation, the impurities are isolated by the filter cloth to form a filter cake. The filter cake becomes thicker and thicker, and the liquid level of the contaminated liquid rises. The floating liquid level controller sends a signal, and the reducer starts to drag the filter cloth. The contaminated liquid and dirty cloth fall into the dirty paper box, thus achieving automatic replacement of the filter cloth

Product Details

Magnetic separator for surface grinderAlso known as pressure roller magnetic separator or rubber roller magnetic separator, it mainly relies on permanent magnet magnets: ferrite, neodymium iron boron, arranged according to certain rules into a large magnetic block, and then these magnetic blocks are placed in a closed space of stainless steel, using magnets to adsorb iron filings

Magnetic separator for surface grinderThere are two types: rubber roller magnetic separator and comb tooth magnetic separator. The rubber roller magnetic separator is mainly suitable for small and powdery particles in liquids, such as most grinding machines. Comb tooth type magnetic separators are mainly used for liquids with large particles, such as spinning machine matching, cold rolling wastewater treatment, etc. And for small flow applications, rubber rollers and magnetic separators are commonly used

The rubber roller type magnetic separator consists of the following parts: reducer, box, magnetic roller, and rubber roller. The reducer drives the magnetic roller to rotate, and the coolant containing powdered magnetic impurities enters the box. The impurities are adsorbed onto the outer wall of the magnetic roller, and then crushed by the rubber roller to squeeze out the liquid carried by the impurities. Finally, the scraper separates the impurities from the magnetic roller. Rubber roller type magnetic separators are widely used for purifying cutting fluids containing powder impurities, such as grinders, internal and external cylindrical grinders, and centerless grinders

The comb shaped magnetic separator consists of the following parts: reducer, housing, magnetic roller, and scraper plate. As an improved product of traditional magnetic separators, comb tooth magnetic separators have many advantages: magnetic rollers of the same length are made into comb teeth, which greatly increases the adsorption area, has high magnetic force, and high separation rate. They are particularly suitable for centralized separation and removal of high flow coolant, and can separate granular chips. Comb tooth magnetic separators are widely used in various ordinary grinding machines, powder coating lines, roll grinding machines, steel rolling wastewater purification, bearing grinding lines and other cutting purification occasions containing granular impurities