Supply SMC Cyclone Suction Cup XT661 Full Series Products

Supply SMC Cyclone Suction Cup XT661 Full Series Products-Shanghai Nianci Machinery Equipment Co., LtdLong term advantage for sale: SMC compressed air management system, SMC directional control components, SMC cylinders, SMC swing cylinders/air claws, SMC electric actuators/cylinders, SMC vacuum components, SMC collaborative robot special grippers, SMC small air compressors, SMC air source processing components, SMC F.R.L components/pressure control components, SMC pressure control components, SMC pressure increasing valves, SMC lubrication components, SMC piping&fittings, SMC speed control valves, SMC mufflers/exhaust cleaners/qi guns/pressure gauges, SMC sensors/switches, SMC static countermeasures components (static eliminators), SMC industrial communication components/wireless systems, SMC fluid control components, SMC chemical liquid valves/pipe fittings Needle valve/tube, SMC diaphragm pump, SMC temperature controller, SMC process gas element (special gas valve), SMC high vacuum element, SMC industrial filter/sintered metal filter element, SMC process control element, SMC hydraulic elementdocument

SMCThe combination of cyclone suction cup XT661 series and workpiece shape requires customers to provide their own guide plates.
: Maintenance and positioning of workpieces
Due to non-contact handling, the workpiece moves laterally during transportation.
To maintain the workpiece, please set up guide plates on the side of the workpiece.
@Prevent contact
According to the usage conditions, there is a possibility of contact with the workpiece during suction lifting.
To prevent contact, please set up a guide plate that maintains a distance from the workpiece.
Prevent rotation
1) In the case of using one, due to the cyclone effect, the workpiece tends to rotate.
To prevent rotation, please set up a guide plate.
2) For two or more occasions, please use even numbers for both the right and left swirl types of the vortex. This can prevent the rotation of the workpiece.

XT661 series cyclone suction cup Bernoulli type

● Can assist in the transportation of non-contact workpieces
Maximum workpiece attraction distance: 10mm
● 2 types available
Whirlwind type: high lifting force: maximum 44N
Bernoulli type: amplitude of workpiece during clamping: below ± 0.01 mm

The working principle of Bernoulli suction cup is that high-pressure air enters the suction cup core and is sprayed out through the outlet of the special structure of the suction cup core to form a cyclone. At this time, the gas flow velocity on the upper surface of the workpiece is greater than that on the lower surface. Using the principle that the faster the flow velocity, the lower the pressure, and a pressure difference will be generated on the upper and lower sides of the workpiece, thus forming an upward lifting force at the bottom of the workpiece. Because the cyclone is formed by high-pressure air ejected from the center of the suction cup, an air surface is formed between the object and the bottom of the suction cup, creating a non-contact effect and sucking up the object. The current exhaust method of Bernoulli suction cups is to tighten two parts, leaving a small gap in between to allow gas to be ejected from the gap, thus forming suction force. This may have the following problems:

1. Because the two parts are fixed with screws, the interval between one circle will be within this tolerance, which will directly lead to a situation where the suction force of the suction cup is larger on one side and smaller on the other;

2. Because the interval between gas outlets is usually only 0.2mm to 0.5mm, there will be ash blockage during the adsorption process of products such as silicon wafers, which will directly affect the suction force;

SMC non-contact suction cup XT661 series

Non contact construction can minimize the damage and suction marks on the workpiece
- Hold onto BGA and other perforated PCB boards tightly
Because it is non-contact, the cost can be reduced
- Reduce air consumption
- Increase suction power

SMC non-contact suction cup XT661 series

XT661-10C-X321
XT661-2A-L
XT661-2A-L-X260
XT661-2A-R
XT661-2A-R-X260
XT661-4A-L
XT661-4A-R
XT661-4BD-X300P
XT661-4C-X321
XT661-6A-L
XT661-6A-R
XT661-8A-R
XT661-8C-X321
XT81-58
XT92-51-X2
XT92-52-X2
XT92-59
XT92-65
XT92-67
XTO-1239-02
XTO-1239-03
XTO-1239-04
XTO-1719-06
Xto- 1719 - 06 B
XTO-1719-10
Xto- 1719 - 10 b