- Phone
-
Address
No. 158 Shanji Road, Xiangcheng District, Suzhou City, Jiangsu Province
Product Categories
Suzhou Shigeyi Electromechanical Equipment Co., Ltd
Sunny Gear Pump from the United States
NegotiableUpdate on 05/19
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Sunny gear pump $r $nSUNNY internal gear pump in the United States adopts the principle of gear internal meshing, with one side of the inner and outer gear pitch circles separated by a "crescent plate" on the pump cover. This hydraulic gear pump belongs to hydraulic power components and can be matched with various hydraulic stations or lubrication systems. It can also be used as hydraulic power in construction machinery.
Product Details
Sunny Gear Pump from the United States
Sunny Sunny gear pumpSunny Sunny oil pumpSunny hydraulic pump
SunnySUNNY combined gear pump
When assembling the motor axis and pump axis using a coupling, the parallelism error should be within 0.05mm and the angle error should be within 1 degree. It is generally recommended to use a direct type oil pump dedicated motor.
The external oil drain port of the variable displacement pump must have its oil drain pipe directly connected to the return oil tank and cannot be returned through other oil pipes. The oil drain pipe must be below the oil level. To prevent mud and sand from entering the motor, a water slinger is installed at the upper end of the motor, and skeleton oil seals are installed in the upper and lower bearing chambers, forming a sealed structure for the entire motor system.
The pump suction port should not be higher than 1 meter above the oil level. Low intensity mechanical vibration is inevitable in rotating equipment and flowing media. It is necessary to avoid vibration induced lining problems as much as possible in the design, operation, and aspects of unit manufacturing and installation, in order to minimize the harm of vibration.
Pressure adjustment: Turn the pressure adjustment screw to the right to reduce the output pressure, and turn it to the left to increase it.
Maximum peak value: The maximum peak value shall not exceed 140 bar. The maximum peak value of A3 type shall not exceed 140 bar.
When assembling the floating ring, be careful not to knock over the floating ring spring, so as not to affect the floating performance of the floating ring after the spring is knocked over. After assembling the floating ring, you can gently press the floating ring to determine if it has good floating performance.
When using this pump, several main parts should be noted: bearings: when the bearings wear out to a certain extent after long-term operation, they need to be replaced.
The product is widely used in petroleum exploration and development evaluation experiments, catalytic reactions in petrochemicals, polymerization reactions, food, pharmaceuticals, liquid chromatography analysis, supercritical extraction, separation, atomic energy science, environmental science, process equipment, experimental equipment, and trace liquid delivery of various liquids. The performance indicators of TBP series parallel flow pumps (plunger pumps) can meet the requirements of studying the rheological characteristics of oilfield fluid flow. There is a gap in equipment manufacturing in related experimental technology fields in China, reaching the level of similar instruments.
Sunny Gear Pump from the United States
