Welcome Customer !

Membership

Help

Guangzhou Jiahui Electronic Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Guangzhou Jiahui Electronic Technology Co., Ltd

  • E-mail

    jiahui_gz@163.com

  • Phone

    13378696369

  • Address

    No. 80 Jingang Avenue, Nansha Economic and Technological Development Zone, Guangzhou City, Guangdong Province

Contact Now

Stainless steel dual control point float level switch SI-200-12

NegotiableUpdate on 01/30
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin

Overview

Stainless steel single ball dual control points_Float level switch Product introduction: The level switch is mainly composed of a magnetic spring switch and a float. The float has magnetic material inside, and when the float moves up and down with the measured liquid level, it triggers the magnetic spring switch to detect the liquid level position

Product Details

Stainless steel single ball dual control points_Float level switch Product introduction:
The liquid level switch is mainly composed of a magnetic spring switch and a float. The float contains magnetic material, and when the float moves up and down with the measured liquid level, it triggers the magnetic spring switch to detect the liquid level position. One or more reed switches are installed inside a sealed non-conductive magnetic tube. When the annular magnet approaches the center of the reed switch, the reed switch contact is ON. Conversely, when the magnet leaves, the reed switch changes from ON to OFF.

Stainless steel single ball dual control points_Float level switch product advantages:
Floating ball level switch has a lightweight volume, simple working principle, high reliability, long working life, low price, long service life, simple installation and applicable range.
不锈钢单球双控制点_浮球液位开关,磁感应开关,小型浮球开关,水位传感器

Stainless steel single ball dual control points_float level switchThe electrical parameters are as follows:

Product Model:
SI-200-12-10W
SI-200-12-50W
Electric shock power:
10W
50W
Zui large switch voltage:
100VDC
220VDC
Maximum switch current:
0.5A
0.7A
Zui small breakdown voltage:
220VDC
400VDC
Load current:
1A
1.5A
Maximum impedance:

100mΩ

Contact signal:
On-off switch signal (normally open, normally closed optional)
Operating Temperature
-10~120 degrees (customized for high temperatures)
Electrical life
Over 1 million times
Float material:
SUS304/SUS316
Floating rod material:
SUS304/SUS316
Material of fixed nut:
SUS304/SUS316
seal ring:
silicone ring
Notes:
1. Do not use under strong magnetic fields
2. Please use in liquid that is fluid and not dry
3. Please use within the rated parameter range
4. Please protect with care and do not throw or drop

Can be customized according to sample processing