Stainless steel corrosion-resistant pressure gauge

NegotiableUpdate on 09/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The stainless steel corrosion-resistant pressure gauge YTN-100H is based on the advanced technology of stainless steel vibration resistant pressure gauges introduced from Japan, and refers to similar products from Germany. This instrument adopts a direct contact type, with SUS316 material for the joint and pressure sensing element, which has strong resistance to corrosion of the measured medium. At the same time, the shell, core and other components are all made of 1Cr18Ni9Ti, OCrl8Ni12M02Ti materials

Product Details

Stainless steel corrosion-resistant pressure gauge

YTN-100H is based on the advanced technology of introducing stainless steel vibration resistant pressure gauges from Japan and referencing similar products from Germany. This instrument adopts a direct contact type, with SUS316 material for the joint and pressure sensing element, which has strong corrosion resistance to the measured medium. At the same time, the shell, core and other components are all made of 1Cr18Ni9Ti, OCrl8Ni 12M02Ti materials. The structure is fully sealed, with its outer surface fully covered
The PTFE coating sprayed on the part has the best ability to resist environmental corrosion, so this product is suitable for media with strong corrosiveness suitable for stainless steel component detection and harsh external corrosive environments.
Specification
l、 Accuracy level: 1.6 level
2. Measurement range: (Mpa) (special specifications, please specify when ordering)
0-0.1 0-0.16 0-0.25 0-0.4
0-0.6 0-1 0-1.6 0-2.5
0-4 0-6 0-10 0-16
0-25 0-40 0-60
-0.1-0 -0.1-0.06 -0.1-0.15 -0.1-0.3
-0.1-0.5 -0.1-0.9 -0.1-1.5 -0.1-2.4
3. Component materials: SUS316, SUS316L, 1Cr18Ni9Ti
4. Instrument nominal diameter: Φ 100mm Φ 150mm
5. Joint thread size: M20X1.5 (G3/8 ", Gl/4", NPTl/2 ",...)
6. Working conditions: (1) Environmental temperature: -40-70 ℃
(2) Work pressure: Static load: Used for measurement
3/4 of the upper limit value
Alternating load: used to measure 2/3 of the upper limit value
Short term pressure: used up to the upper limit of measurement