Stacked full temperature oscillation incubator

Stacked full temperature oscillation incubatorProduct Features:

1. The inner chamber of the incubator is designed with 304 stainless steel waterproofing, and all components sensitive to water or mist are placed outside the incubator. The inner chamber of the incubator is rinsed with water.

2. The double-layer safety glass doors inside and outside have good thermal insulation performance, and the large viewing angle observation window provides better observation of cell culture inside the equipment.

3. Streamlined appearance, the inner liner adopts a curved angle mirror stainless steel design, which is easy to clean, not easy to breed bacteria, rust, and corrosion-resistant.

4. Compared with traditional fans, integrated fans can make the temperature of the inner tank more uniform and stable, and effectively reduce back heat.

5. The equipment adopts imported compressors, which operate almost quietly, control temperature faster and more stably, and operate at high speed without any abnormal or obvious vibration when stacked in multiple layers.

6.comprehensiveUV sterilization, with built-in UV sterilization lamps in the inner container to enhance the sterilization effect.

7. It has fixed value mode and multi-stage mode, which can be selected by the operator. In fixed value mode, the time setting range is 0-9999h. In multi-stage mode, 0-30 segments can be set, with each segment set within a range of 0-9999h.

8. It has over temperature alarm function and automatic power-off function in case of abnormal situations, as well as power-off recovery function, which can avoid data loss caused by power outages or crashes.

9. Suspended door opening design, compared to traditional lower door design, further reduces the footprint and makes operation inside the box more convenient and fast.

10. Integrated pull-out oscillation plate, sliding to design. Easily pull out the loading and unloading fixture and then push in the lock, without loosening the fastening screws throughout the entire process, and complete the pulling with one hand. More effectively utilize the space inside the box.

11. It has a door control start stop function, and the oscillation plate buffers and stops rotating after opening the door.

12. Equipped with servo motor, it has strong stability and precise speed during operation.

13. When operating at low temperatures, activate the automatic defrosting function to achieve more precise temperature control of the box. It also has a timed defrosting function, which can be freely set within 1-300 seconds, and the defrosting interval can be adjusted between 10-900 minutes.

14. Equipped with filter magnetic rings to reduce external and internal interference with the machine.

Stacked full temperature oscillation incubatorTechnical Specifications: