-
E-mail
hinlsen@126.com
-
Phone
18661419579
-
Address
No. 702 Shanhe Road, Liuting Street, Chengyang District, Qingdao City, Shandong Province
Product Categories
Shandong Zhonghan Environmental Technology Co., Ltd
Spray tower organic waste gas treatment equipment
NegotiableUpdate on 04/22
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Spray tower is a type of equipment for waste gas treatment, which can be used in industrial waste gas treatment. Usually, there is a lot of acid mist waste gas treatment, so it is also called an acid mist waste gas tower. But our spray tower can not only treat acid mist exhaust gas but also other exhaust gases, such as ammonia (NH3), hydrogen sulfide exhaust gas, VOC organic exhaust gas, household waste exhaust gas, and waste combustion exhaust gas.
Product Details
Characteristics of Spray Tower
1. The dust removal and desulfurization efficiency is high, and when alkaline washing water is used, the desulfurization efficiency can reach 85%.
2. The equipment takes up less space and is easy to install.
3. Low water and electricity consumption indicators.
4. Corrosion resistant, wear-resistant, and have a long service life.
5. The equipment operates reliably and is easy and convenient to maintain.
Spray tower structure
The structure of a conventional spray tower can be summarized as follows: one layer for defogging, two layers for spraying, three layers for filling, four windows, and five ball valves with flexible joints.
Mist removal layer: Generally separated by grid plates, with fillers placed on top. The height of the filler layer can reach 500mm. In order to improve the mist removal efficiency, our company's spray tower can be equipped with a plate type mist remover.
Spray layer: The spray layer is composed of spray pipes and nozzles, with different densities depending on the diameter of the spray tower. With high-efficiency nozzle, the spray is even and the flow is large, which is not easy to block.
Packing layer: The packing layer is placed on top of the defogging layer and spray layer. The main fillers include polyhedral hollow spheres and Raschig rings. The packing layer inside the spray tower serves as a mass transfer device for gas-liquid two-phase contact components. The bottom of the packing tower is equipped with packing support plates, and the packing is placed on the support plates in a disorderly manner. Install a packing pressure plate above the packing to prevent it from being blown by the rising airflow. The spray liquid from the spray tower is sprayed onto the packing material through the liquid distributor at the top of the tower and flows down along the surface of the packing material.
1. The dust removal and desulfurization efficiency is high, and when alkaline washing water is used, the desulfurization efficiency can reach 85%.
2. The equipment takes up less space and is easy to install.
3. Low water and electricity consumption indicators.
4. Corrosion resistant, wear-resistant, and have a long service life.
5. The equipment operates reliably and is easy and convenient to maintain.
Spray tower structure
The structure of a conventional spray tower can be summarized as follows: one layer for defogging, two layers for spraying, three layers for filling, four windows, and five ball valves with flexible joints.
Mist removal layer: Generally separated by grid plates, with fillers placed on top. The height of the filler layer can reach 500mm. In order to improve the mist removal efficiency, our company's spray tower can be equipped with a plate type mist remover.
Spray layer: The spray layer is composed of spray pipes and nozzles, with different densities depending on the diameter of the spray tower. With high-efficiency nozzle, the spray is even and the flow is large, which is not easy to block.
Packing layer: The packing layer is placed on top of the defogging layer and spray layer. The main fillers include polyhedral hollow spheres and Raschig rings. The packing layer inside the spray tower serves as a mass transfer device for gas-liquid two-phase contact components. The bottom of the packing tower is equipped with packing support plates, and the packing is placed on the support plates in a disorderly manner. Install a packing pressure plate above the packing to prevent it from being blown by the rising airflow. The spray liquid from the spray tower is sprayed onto the packing material through the liquid distributor at the top of the tower and flows down along the surface of the packing material.
Similar Product Recommend
