Spray dryer ZQ-3L

NegotiableUpdate on 12/08

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product description: ZQ-3L small spray dryer (small spray dryer/small spray dryer) and its main applications are universities, research institutes and laboratories of food, medicine and chemical enterprises to produce micro particle powders. It has broad spectrum applicability to all solutions such as emulsion and suspension, and is suitable for drying heat sensitive substances such as biological products, biological pesticides, enzyme preparations, etc. Because the sprayed materials are only exposed to high temperature when sprayed into aerosol particles, they are only heated instantaneously, which can keep the active ingredients of these active materials intact after drying. Main features of 3000Y spray dryer

Product Details

Product Introduction

Stainless steel small spray dryerMain characteristics;
The original nozzle (dual fluid nozzle) has high efficiency.(Optional centrifugal nozzle)
Color LCD touch screen parameter display: inlet temperature/outlet temperature/peristaltic pump speed/air volume/needle frequency.
● Full automatic control: one button startup, after setting spray process parameters, the temperature reaches the preset temperature, the peristaltic pump starts automatically, the touch screen displays the operation animation, and the operation process is clearly displayed; When shutting down, simply press the stop button and the machine will automatically shut down safely.
● Manual control: If it is necessary to adjust the process parameters during the experiment, it can be easily switched to manual mode, and the entire experiment process is dynamically displayed on the color touch screen (animation)
Equipped with a nozzle cleaner (through needle), it will automatically clear when the nozzle is blocked, and the frequency of the through needle can be automatically adjusted.
● Shutdown protection function: When shutting down, simply press the stop button, and the machine will immediately stop running except for the fan, ensuring that the equipment will not burn out the heating part due to misoperation (forcibly shutting down the fan).
The entire system is made of stainless steel material, allowing the drying process to be carried out in a pollution-free environment.
Equipped with an imported oil-free air compressor, the particle size of the powder sprayed follows a normal distribution, with excellent fluidity and very low noise, less than 60db.
● Two fluid spray atomization structure, the whole machine is made of high-quality stainless steel materials, compact design, and no auxiliary equipment is required.
The design of drying temperature control adopts real-time PID constant temperature control technology, which enables accurate temperature control in the entire temperature range and heating temperature control accuracy of ± 1 ℃.
In order to maintain the purity of the sample, an air inlet filter is equipped.
The feeding amount can be adjusted by the feeding peristaltic pump, and the minimum sample size can reach 50ml.
The dried finished dry powder has a relatively uniform particle size, with over 95% of the dry powder within the same particle size range.
For viscous materials, there is a nozzle cleaner (through needle) that automatically clears the nozzle when it is blocked, and the frequency of the through needle can be adjusted automatically.
Innovative tower wall blowing device with higher material recovery rate.
Stainless steel small spray dryerTechnical Specifications:
◆ Inlet air temperature control: 30 ℃~300 ℃
◆ Air outlet temperature control: 30 ℃~140 ℃
Evaporation water volume: 1500ml/h to 3000ml/h
Maximum feed rate: up to 3000ml/h (adjustable)
◆ Feeding method: peristaltic pump adjustment
◆ Minimum feed quantity: 50mL
Temperature control accuracy: ± 1 ℃
Average drying time: 1.0-1.5s
◆ Whole machine power: 5KW/220V
◆ Dimensions: 1450mm (height) × 800mm (length) 780mm (width)