Sports equipment impact testing machine/protective gear impact force testing machine

Sports pad impact testing machine knee pad arm pad impact

1、 Purpose: Used for testing the buffering energy of materials such as impact, sports chest and back protectors, shock resistant gloves, etc. (to withstand one impact test while measuring the transmitted force)

2、 Standard specification requirements:

【1】 EN 388-2016:6.6, EN 13594-2015:6.9 (EN 1621-1): Impact buffering and protection performance (impact force) of gloves and other materials

1. Falling weight of 2500 ± 10g, collision kinetic energy of 5J (200mm);

2. Impact head: flat type 40 * 80, corner R5 ± 1;

3. Anvil: Convex circular arc surface, R100 * ¢ 100

【2】 GB/T 24278-2019, EN 1621-1: Impact absorption of motorcycle protective gear (impact force)

1. Falling weight of 5000 ± 10g, collision kinetic energy of 50J (1000mm);

2. Impact head: flat type 40 * 80, corner R5 ± 1;

3. Anvil table: Head hemisphere R 50 ± 1mm * cylinder ¢ 100, height: 180 ± 20mm;

【3】 EN 1621-2, EN 1621-3: Back impact protection, chest protection impact protection (impact force)

1. Falling weight of 5000 ± 50g, collision kinetic energy of 50 ± 1.5J (1000mm);

2. Impact head: Axe shaped L (160 ± 2) * Top width (50 ± 1) * Axe blade hemispherical radius (12.5 ± 0.1);

3. Anvil: Top curved surface, R150 * ¢ 100, height 190 ± 20;

【4】 EN 1621-3: Motorcycle Chest Impact Protection (Impact Force)

1. Falling weight of 5000 ± 50g, collision kinetic energy of 50 ± 1.5J (1000mm);

2. Impact head: cylindrical (hemispherical impact head): diameter 25 and front hemisphere R (25 ± 1);

3. Anvil: Top curved surface, R150 * ¢ 100, height 190 ± 20;

【 Five 】BS EN 14021:2003 Stone shields for off-road motorcycles(Impact force)

1. Falling weight 1000 ± 50g, collision kinetic energy 10 ± 1J

2. Impact head: cylindrical (hemispherical impact head): diameter 25 and front hemisphere R (12.5 ± 0.1);

3. Anvil table: as shown in the picture

Sports pad impact testing machine knee pad arm pad impact

Equipment technical parameters:

1. Impact strength energy requirements: (The software inputs the required impact energy and can automatically calculate the impact height without manual calculation)

4. Impact height: 0-1000mm can be set

6. Boosting control: stepper motor lifting.

7. Displacement sensing device: high-precision displacement encoder reading.

7. Machine base: A 1000kg cement base (provided by the customer) can also be screwed into the ground.
8. Release method: Electromagnetic release control, with release alarm caution light, power-off protection pin.

9. High speed piezoelectric sensor with a sampling frequency greater than 10KHz

11. Equipped with a speed sensor to calibrate the G acceleration loss caused by frictional resistance;

12. Controller: Computer program control, real-time display of buffer transmission absorption force curve or force gauge display of maximum force and hammer drop speed.

13. Installation requirements:

Size (length * width * height MM): 655 * 860 * 2200

Weight (kg): 180

Power supply: AC 220V 50Hz 1500W

Environment: 5-35 ℃

Operation: Landing

Product Configuration

1 set of host

2. One laptop computer;

3. Two sets of impact force sensors: one for 100KN and one for 50KN.

4 sets of standard impact heads

5. Four sets of standard drill seats

6. One copy of the product manual;

Sports pad impact testing machine knee pad arm pad impact