Split type electromagnetic flowmeter display mode: on-site display and remote display. Welcome to purchase

It is an electromagnetic induction flow meter, a high-tech electromechanical product that integrates signal detection and microelectronic intelligent technology The converter circuit adopts a 32-bit high-speed embedded MCU processor, large screen LCD display, Chinese menu, and features complete functions, advanced design, and convenient operation It can be divided into two categories based on installation methods: pipeline type and plug-in type. It can also be divided into on-site display type (integrated type) and remote display type (split type) according to display methods. It can measure the volume flow rate of conductive liquid media, including highly corrosive liquids such as acids, alkalis, salts, pulp, mud, wastewater, and solid-liquid two-phase suspensions. The product is widely used in industries such as petroleum, chemical, metallurgical, textile, food, pharmaceutical, papermaking, as well as environmental protection, municipal, water conservancy, and river irrigation.

Parameters;

1. Display function: The instrument adopts a large screen LCD display, which can display accumulated flow, instantaneous flow, percentage, alarm information, etc
2. Easy to operate: The fully Chinese menu makes instrument operation clear at a glance

3. Automatic conductivity transfer function: The flowmeter can automatically transfer conductivity according to the wide range of changes in fluid conductivity, and is highly adaptable to complex fluid changes

4. Automatic range switching function: When the fluid flow rate changes within a wide range, the range of the flowmeter can be automatically switched to ensure accurate measurement throughout the entire flow range

5. Automatic zero position adjustment to eliminate zero drift.

6. Self checking fault alarm: In working state, when the flowmeter measuring tube is empty, the excitation is open or short circuited, it will automatically alarm and visually prompt
7. Over range alarm: When the flow rate exceeds the upper and lower limits set by the user, the flow meter automatically alarms and displays the content intuitively, providing a switch signal
8. [Patent] Wenqiu Li Structure Design: The unique Wenqiu Li structure reduces the demand for the front and rear straight pipe sections of the flowmeter installation and can relatively increase the flow velocity of the medium inside the pipe to meet the needs of smaller flow rates
9. Power outage protection function: The calculation results of the flowmeter and the parameters set by the user will not disappear after power outage, and will be stored by E2PROM for long-term preservation

10. Forward and reverse measurement function: Users can choose forward measurement or reverse measurement (if there are no special requirements, the factory uses forward measurement and reverse measurement is not used)

11. The signal processing adopts a modular design, which facilitates on-site maintenance and replacement without the need for recalibration

12. Low power dual power supply design: can use 220VAC or+24VDC input, power consumption ≤ 15W
13. Sensor electrodes are diverse, and can be selected from detachable, fixed, or scraper electrodes according to different application conditions