Split type amplifier

Each sensor model can be equipped with the following broadband signal processors to form a broadband dynamic pressure transmitter. The ordering code for the integrated structure of sensors and signal processors is YT; the ordering code for the split structure is FT.

Add "1" before the three digits of the original sensor model when ordering a dynamic pressure transmitter

Example: CYG401 high-frequency dynamic pressure sensor, CYG1401 YT high-frequency dynamic pressure transmitter.

Broadband signal processor, according to bandwidth:

Broadband signal processors require users to use ± 15V linear power supply, and it is recommended to use Chaoyang Military Power Supply.

Dynamic pressure transmitter output signal mode: 0-5V (can be customized according to the voltage output mode required by the user)

Attention: If long-distance wiring is required, it is recommended to use an integrated structure transmitter. The broadband signal processor unit of the dynamic pressure transmitter can only withstand temperatures of -20 ℃ to 100 ℃. When using high-temperature dynamic pressure transmitters, attention should be paid to reasonable use.

Optional accessories:

Multi channel constant voltage adapter: with a separate structure from the transmitter, built-in sensor power supply, with BNC interface signal output, used in conjunction with the acquisition instrument.

(Route 8, Route 16, Route 20)

Single channel adapter: The signal output uses BNC output interface, which can be directly used in conjunction with the acquisition instrument.

Cable: ordinary shielded multi-core cable or dedicated double shielded twisted pair multi-core cable.