Split open channel flowmeter

1Split open channel flowmeterOverview

Thank you sincerely for choosing our ultrasonic open channel flowmeter!

This instrument can directly display instantaneous flow and cumulative flow, with built-in EEPROM digital memory to ensure data is not lost after power failure. The instrument is also equipped with explosion-proof probes specially designed for the petroleum and chemical industries to meet the measurement requirements of sewage flow in explosion-proof areas, especially suitable for flow measurement of oily wastewater.

　　Split open channel flowmeterThis instrument can be matched with various national standard weirs or tanks, and can be widely used for measuring or monitoring the total amount of water quality discharge. The measurement results are not affected by water quality. The ultrasonic open channel flowmeter also has multiple built-in algorithms, suitable for various standard weirs and channels, with optional communication interfaces, making it easy to connect with other DCS systems for remote monitoring and control in industry.

Ultrasonic open channel flowmeter has the following characteristics:

Stable and reliable

We select high-quality modules and key components from the power supply section in circuit design, and choose highly stable and reliable devices for procurement, which can directly replace imported instruments from abroad.

High precision

Our company's sound wave intelligent technology greatly improves the accuracy of ultrasonic open channel flow meters, with a liquid level accuracy of 0.3% and the ability to resist various interference waves.

Low failure rate, easy installation, and easy maintenance

This instrument is a non-contact instrument that does not come into direct contact with liquids, resulting in a low failure rate. The instrument provides multiple installation methods, and users can calibrate the instrument through this manual.

Multiple protections

The protection level of the instrument reaches IP65; All input and output lines have lightning protection and short-circuit protection functions.

4.4.2 Selection of Display Mode

1) Press the Mode key to enter the parameter settings menu while the instrument is running, and then press the ▼ key to select P05

(Xstyle) Display interface settings menu.

2) Press the OK button to enter the display interface settings, and the LCD display will show as shown in the right figure, indicating that it is now the flow display interface.

3) Click the ▲ or ▼ keys to select Level

Press the OK key to confirm and the interface will return to the previous menu.

4) Press the Mode key until exiting parameter settings, instrument

The table displays the liquid level value, as shown in the figure on the right,

1.230 indicates a liquid level of 1.230m.

4.4.3 Flow parameter settings

1) Press the Mode key to enter parameters while the instrument is running

Press the ▼ key to select P03 (Flow) from the settings menu

The flow parameter menu is shown in the figure on the right.

2) Press the OK key to enter the password setting interface, as shown in the figure on the right.