Splicing bending plate - cast iron splicing bending plate

Splicing bending plate is used by splicing two or three splicing bending plates together, and the surface of the bending plate can have a T-shaped groove.

Splicing bending plateIs it made up of two or three blocksSplicing bending plateWhen used together, the curved surface of the board can have a T-shaped groove.
Manufactured according to JB6092-85 standard, material HT200-HT300, working face adopts scraping process, used for component inspection and clamping in mechanical processing.
Used to inspect the 90 ° angle of workpieces, check the mutual perpendicularity of relevant surfaces of components during equipment maintenance, and is also commonly used for marking by fitters. And it can be commonly used for inspection, installation, and vertical surface inspection of machine tools, and can check the perpendicularity of workpieces on cast iron platforms. It is suitable for high-precision mechanical and instrument inspection and inspection of non perpendicularity between machine tools.
Caution: Do not use or store bent plates in damp, corrosive, excessively high or low temperature environments. Before use, the bending plate should be installed and debugged, and then the working surface of the bending plate should be wiped clean. After confirming that there are no problems, the bending plate can be used.
Its accuracy: Level 1, Level 2, Level 3.

Specifications mm	Measure the verticality of the surface facing the base plane			Measure the flatness or straightness of the surface			Reference flatness or straightness
	Accuracy level um
	1	2	3	1	2	3	1	2	3
200×200	8	16	30	4	8	16	6	12	24
300×200	10	20	40	5	10	20	8	16	30
300×300	10	20	40	5	10	20	8	16	30
400×300	12	24	45	6	12	24	10	20	40
400×400	12	24	45	6	12	24	10	20	40
500×400	14	28	50	7	14	28	12	24	48
500×500	14	28	50	7	14	28	12	24	48
800×600	18	35	60	9	18	35	14	28	55
1000×800	25	50	70	12	24	45	18	35	70