Special gas cabinet for hazardous chemicals

Special gas cabinet for hazardous chemicalsDesign basis

This product is designed based on the following standards:

1. GB50646-2020 (Special Gas System Engineering Standard)

2. Relevant standards such as T/CCGA20003-2021 (gas busbar)

3. Fire door closer (GA93-2004)

4. Label specifications:

5. Rubber structural seals for buildings GB/T23661-2009

Application scenario: Suitable for the storage and transportation of special gases that are flammable, explosive, toxic, corrosive, and have special requirements for gas safety.

Special gas cabinet for hazardous chemicalsProduct Features

1. This product design complies with relevant national standards and is compliant

2. This product is designed to conform to human operating habits and is easy for users to operate

3. This product is safe and environmentally friendly

4. This product design fully considers transportation and installation factors, making it convenient for related operations

Box technical parameters:

1. Cabinet body: The entire body is made of high-quality cold-rolled steel plates with a thickness of ≥ 2.5mm, which are CNC bent and formed. After acid pickling, phosphating, and pre baking treatment, the surface is electrostatically sprayed with epoxy resin and has white orange lines, achieving the effects of acid and alkali resistance and rust prevention. Install gas panels for operation on the inner wall of the cabinet.

2. Door panel: Made of high-quality cold-rolled steel plate with a thickness of ≥ 2.5mm, the door lock adopts imported SOSCO pull open gate lock (64-40-411-50); The door sealing strip is made of high-quality U-shaped sealing strip, 10x21 (bubble height 8mm), with a built-in steel structure. The sealing strip complies with GB/T23661-2009 and has been tested by relevant institutions.

3. Explosion proof window: It is equipped with an open explosion-proof window with a size of 246 * 345mm. When the cabinet door is not open, a small window can be opened to achieve safe and reliable daily operation, and facilitate daily maintenance and observation of the equipment status inside the cabinet. Handle and lock two in one design, press to open, black, beautiful and elegant, easy to operate; Imported AGC explosion-proof glass window, thickness ≥ 6.5mm, with metal wire inside, high transparency, high safety, and strong strength; The window adopts a detachable zinc alloy hinge, equipped with an electrostatic jumper, and securely links the door body and cabinet to provide protection.

4. Self closing door system: The cabinet is equipped with a self closing door system, and the door closer adopts the German Doma TS68 fireproof door closer, which can achieve 90 ° limit of the cabinet door and is easy to operate. The door closer meets the GA93-2004 standard and has been tested and qualified by the National Fixed Fire Extinguishing System and Fire resistant Component Quality Supervision and Inspection Center. The designed service life is ≥ 300000 times, and it runs smoothly and flexibly during use. It can automatically close with a light touch of the cabinet door.

5. Gas cylinder bracket: equipped with 4 aluminum alloy mold formed gas cylinder brackets with dimensions of 245 * 245mm, convenient for panel and gas pipe installation, surface coated with epoxy resin, equipped with C-shaped guide rails, adjustable height up and down freely, equipped with quick connect stainless steel chains for fixing, 22 sections in length, and spring buckles at both ends, effectively preventing gas cylinders from tipping over. Double layered fixation of gas cylinders provides greater safety.

6. Air intake filter: The bottom of the door is equipped with a breathable filter (metal mesh with filter cotton), which can effectively filter dust and other particles in the air. It can be manually adjusted and is easy to disassemble, clean, and replace.

7. Installation holes: Four installation holes are reserved at the bottom of the cabinet to facilitate fixed connection with the ground in special environments and ensure the safety of the cabinet.

8. Slope: Equipped with a 304 stainless steel slope for easy loading and unloading of steel cylinders.

9. Identification: The cabinet is equipped with clear and distinct safety signs that comply with regulations.

10. Reserved gas scale installation hole at the bottom, size: equipped with an aluminum alloy integrated cover plate to ensure use in an unbalanced state.