Source water purification smoke generator YS-AT142

Source water purification smoke generator YS-AT142It is a multifunctional integrated atomizing aerosol generator with a compact body that is easy to carry, making it very suitable for testing filters and clean environments on site.The aerosol generator has a specially designed nozzle, and compressed air is blown into the liquid to be atomized through an annular gap. The shear force between the air injection port and the liquid is fully dispersed in this so-called annular gap, forming small aerosol particles. The inertial collider captures large-sized aerosol particles and returns them to the liquid container, resulting in the output particle size mainly distributed below 2 μ m.

Features:

1.Front mounted flowmeter, pressure regulating valve

2.Built in HEPA (high-efficiency filter)

3.Overpressure release safety control system

4.Internal and external gas source conversion

5.Quiet operation with low noise

6.Intuitive user control mode

7.stainless steel material

Purpose:

1.Filter testing

2.Particle size instrument evaluation

3.Wind tunnel seeding

4.Laminar flow box test

5.acceptance test

6.General Test

7.Aerosol generation

Source water purification smoke generator YS-AT142Main parameters

1.Particle types: DES, PAO, DOP, liquid paraffin oil, NaCl,KCl,PSL, Other salt solutions

2.Aerosol particle size range: 0.1~3.0 μ m, 0.2~0.3 μ m (DES sample)

3.Output particle concentration:>107/cm3

4.Particle mass flow rate: 2.5kg/h (DES sample)

5.Flow rate: 1.0~4.2L/min

6.Air source: built-in air pump or external compressed air

7.Air purification: built-in HEPA (high-efficiency filter)

8.Maximum backpressure: 10kPa (0.1bar)

9.Power supply: AC220V

10.Instrument size: 300 * 120 * 195 (mm)

11.Weight: 4.8kg