- Phone
-
Address
201 Jianchuan Road, Minhang District, Shanghai
Product Categories
Shanghai Yuying Instrument Co., Ltd
Six in one temperature control and electric heating sleeve
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The six in one temperature control electric heating sleeve is an electric heating sleeve that achieves constant temperature heating through electronic pressure regulation. It uses alkali free glass fiber as insulation material, and Cr20Ni80 alloy wire spring is installed in it. It is insulated with a hemispherical insulation body formed by vacuum shaping with aluminum silicate cotton. The shell is molded in one go, and the upper cover adopts electrostatic spraying technology. Due to the use of spherical heating, the heating area of the container can reach more than 60%. It has the characteristics of fast heating, high temperature, easy operation, and durability.
Product Details
1Six in one temperature control and electric heating sleeveparameter
Electric heating sleeve with hemispherical heating, fast heating and high temperature; 、
Power supply 220V/50Hz (can produce 110V mouth type);
There are two pairs, four pairs, and six pairs (which can also be processed according to customer requirements);
Capacity: 50ml, 100ml, 250ml, 500ml, 1000ml
Heating power: 110W, 130W, 216W, 220W, 530W
Temperature control range: room temperature -380 ℃;
Temperature control accuracy: ± 3 ℃ (knob adjustment)
The internal and external sensors can alternately measure and control the temperature of the solution;
Digital display function: optional; Mixing function: optional;
Timer function: optional; Voltage regulation function: optional;
IISix in one temperature control and electric heating sleeveUsage：
Plug in the power, the green light indicates power, and the red light indicates heating. Adjust the knob clockwise to increase the temperature from low to high. When the knob is adjusted to a certain scale, the temperature inside the sleeve reaches a certain basic constant temperature, but requires the assistance of a thermometer for measurement. For the initial heating, the temperature can be appropriately raised or adjusted to the highest level. When the desired temperature is reached or the solution boils, the knob can be lowered for insulation heating to extend the service life. When not in use for a short period of time, the knob can be adjusted to 0 to stop heating. When not in use for a long time, the power should be turned off.
三、 PTHW DLofNotes:
1. The instrument should have a good grounding.
During the first use, it is normal for white smoke and odor to emerge from the sleeve, and for the color to change from white to brown and then back to white. Due to the presence of oil and other compounds in the production process of fiberglass, it should be placed in a well ventilated area and can be used normally after a few minutes of disappearance.
When using an electric heating sleeve with a capacity of over 3.3000ml, there may be a creaking sound due to differences in the furnace wire structure and related to the controllable silicon voltage pulse signal. You can use it with confidence.
When liquid overflows into the sleeve, please quickly turn off the power, place the electric heating sleeve in a ventilated place, and wait for it to dry before use to avoid the danger of electric leakage or electrical short circuit.
When not in use for a long time, please store the electric heating sleeve in a dry and non corrosive gas place.
6. Please do not use empty heating or dry burning.
When the environmental humidity is relatively high, there may be induced electricity transmitted through the insulation layer to the shell. Please ground the wire to avoid leakage and pay attention to ventilation.
