Silicon dioxide analyzer

NegotiableUpdate on 01/28

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The FESKS FOSTCO 5000 SiO2 silica analyzer from the UK is a compact analyzer that uses colorimetric methods to automatically monitor the concentration of silica in water. By adding chemicals to the water sample, a color reversal effect can be generated. Calculate the concentration of silica in water based on the color change of the reagent sample. The instrument has a built-in self calibration program and is a reliable, accurate, and fully automatic analyzer. $r $n is used for measuring silicon dioxide in ultra pure water, boiler water, condensate water, reverse osmosis, and deionized water in power plants and pharmaceutical industries.

Product Details

Product Features:

→Photometric colorimetric measurement

Imported products,Reliable, accurate, and fully automatic analyzer

→ Monitor two programmable limit values

→ Perform simple debugging through the configuration wizard

→ Automatic calibration, automatic diagnosis, and automatic measurement

Compact design, easy to maintain and clean

Multi language, multi-color LED display

Relay output of error message

→ Analog output 0/4-20 mA, digital output RS 485

→ Digital input for initiating analysis, flow switch, or interval reset

Measurement data storage and measurement data protocol on SD card

Update software through SD card

Technical Specifications

parameter	value/scope
measurement method	Photometric colorimetric method
measurement range	The measurement range of Silicate-A, Silicate-B, and Silicate-C reagents is 0.3-10 mg/l
measurement accuracy	The ± value is 5% of the maximum reading of the reagents used separately
current accuracy	±0.3mA
Reagent consumption	approximately0.05-0.5ml/Analysis depends on the measured concentration of silica in the water quality
analysis time	About 15 minutes, depending on the set washing time
Analysis frequency	Reagent A: Approximately 500 analyses per 500 ml of reagent, reagents B and C: Approximately 1000 analyses per 500 ml of reagent each
Shelf life of reagents	Under correct storage conditions, it can be stored for 2 years (<25 ° C, away from light)
water consumption	approximately1rise/Analysis, with2barThe water consumption depends on the inlet pressure and the set flushing time.
relay output	4Road relay, maximum load 250V 4A (alarm, pre alarm, fault, missing indication, analysis contact)
signal input	2One input, maximum load 18V 12mA, stop or start analysis
analog output	0-20mA/4-20 mAResolution:<100 μ A, max.750 Ω
digital output	RS 485 Modbus RTUagreement
power supply voltage	85 - 264 VAC (47...440 Hz)，24V AC/DCoptional
power consumption	30W(Running), 8 W measuring, 3.5W (standby)
load capacity	terminal1The load capacity of a relay with an internal current of 1A up to 4. The load capacity of an external power supply is 2.5 A
size/weight	600 x 488 x 255mm（W x H x D)， about8.7kg
Storage temperature	0°C-45℃
ambient temperature	10°C-45 ℃
Measure water temperature	5°C-40℃
Protection level	IP56

Water quality requirements:General water inlet: pressure min: 0.5 bar - max: 5 bar/recommended 1-2 bar, transparent, no solids, no bubbles, no odor

Water quality requirements for measuring silica in water: pH: 9-10, iron:<3 ppm, copper:<0.2 ppm, aluminum:<0.1 ppm, manganese:<0.2 ppm

FOSTCO 5000 Sio2onlineSilicon dioxide analyzerOrder information

Order number and model description

60-5000-10 FOSTCO 5000 Sio2 silicon dioxideanalyzer

200945 FR 3000 Reagent 1 set, 2 bottles of reagent A, 1 bottle of reagent B, 1 bottle of reagent C, bottles/500ml