-
E-mail
sales@vecona-electric.com
- Phone
-
Address
Room 210, Building 10, Yangshan Zhigu Science and Technology Innovation Park, Xingxian Road, High tech Zone, Suzhou City, Jiangsu Province
Product Categories
Suzhou Weikna Electric Co., Ltd
Short term brake regeneration unit RLD
NegotiableUpdate on 03/27
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Short term brake regeneration unit RLD
Product Details
Regeneration unit RLD
Regeneration units for elevators, crane systems, centrifuges, etc
Compared to the brake chopper, theRevcon Corporation® RLDIt uses regenerative braking instead of converting energy into heat.Energy is fed into the network through an appropriate inversion process.The feedback process of continuous startup will generate a small voltage rise on the DC bus.
The regeneration unitRevcon Corporation® RLDThe rated power of RLD models designed for non continuous regeneration operations, such as elevators, crane systems, centrifuges, etc., is peak braking power and can be used for a typical duty cycle of 50%.The waveform of the regenerative current corresponds to the waveform of the input current of the converter, making it suitable for standard industrial networks.
Benefits:
-
Compact size, including regenerative choke coil
-
The braking energy of the drive system is regenerated into the network
-
The regeneration power can be adjusted according to the application (for example, a 90kW drive with a 30kW regeneration unit)
-
Capacity range 4kW to 433kW
-
High flexibility: The power supply voltage range is 230, 400, 460, 500 to 690V
-
Multiple drivers can be DC coupled.
-
Low loss and high-quality IGBT modules
-
High reliability: electronic overload protection for feedback operation
-
Monitor power supply voltage, phase rotation, and temperature
-
Effective real-time control and similar functional principles, efficiency>98%
-
Realize highly dynamic braking operation
-
User friendly startup method, as no programming or setup is required
-
Significantly reduce heat loss through regenerative operation.
-
Due to the innovative concept, the power feedback unit is maintenance free
-
Duty cycle 50%
Activity Principle: Energy Recovery Module Revcon Company® RLD：
-
When torque is applied to the shaft, energy is generated from the mechanical side of the asynchronous motor.
-
Energy is fed into the DC bus through a frequency converter.
-
The voltage in the DC bus of the inverter and regeneration unit increases.
-
The energy is fed back to the mains through the energy recovery module.
Operating Instructions - Regeneration Unit REVCON RLD - Short term Braking
Data Sheet - Regeneration Unit REVCON RLD - Short term Braking
Regeneration unit RLD
Regeneration units for elevators, crane systems, centrifuges, etc
Compared to the brake chopper, theRevcon Corporation® RLDIt uses regenerative braking instead of converting energy into heat.Energy is fed into the network through an appropriate inversion process.The feedback process of continuous startup will generate a small voltage rise on the DC bus.
The regeneration unitRevcon Corporation® RLDThe rated power of RLD models designed for non continuous regeneration operations, such as elevators, crane systems, centrifuges, etc., is peak braking power and can be used for a typical duty cycle of 50%.The waveform of the regenerative current corresponds to the waveform of the input current of the converter, making it suitable for standard industrial networks.
Benefits:
-
Compact size, including regenerative choke coil
-
The braking energy of the drive system is regenerated into the network
-
The regeneration power can be adjusted according to the application (for example, a 90kW drive with a 30kW regeneration unit)
-
Capacity range 4kW to 433kW
-
High flexibility: The power supply voltage range is 230, 400, 460, 500 to 690V
-
Multiple drivers can be DC coupled.
-
Low loss and high-quality IGBT modules
-
High reliability: electronic overload protection for feedback operation
-
Monitor power supply voltage, phase rotation, and temperature
-
Effective real-time control and similar functional principles, efficiency>98%
-
Realize highly dynamic braking operation
-
User friendly startup method, as no programming or setup is required
-
Significantly reduce heat loss through regenerative operation.
-
Due to the innovative concept, the power feedback unit is maintenance free
-
Duty cycle 50%
Activity Principle: Energy Recovery Module Revcon Company® RLD：
-
When torque is applied to the shaft, energy is generated from the mechanical side of the asynchronous motor.
-
Energy is fed into the DC bus through a frequency converter.
-
The voltage in the DC bus of the inverter and regeneration unit increases.
-
The energy is fed back to the mains through the energy recovery module.
Operating Instructions - Regeneration Unit REVCON RLD - Short term Braking
Data Sheet - Regeneration Unit REVCON RLD - Short term Braking
Regeneration unit RLD
Regeneration units for elevators, crane systems, centrifuges, etc
Compared to the brake chopper, theRevcon Corporation® RLDIt uses regenerative braking instead of converting energy into heat.Energy is fed into the network through an appropriate inversion process.The feedback process of continuous startup will generate a small voltage rise on the DC bus.
The regeneration unitRevcon Corporation® RLDThe rated power of RLD models designed for non continuous regeneration operations, such as elevators, crane systems, centrifuges, etc., is peak braking power and can be used for a typical duty cycle of 50%.The waveform of the regenerative current corresponds to the waveform of the input current of the converter, making it suitable for standard industrial networks.
Benefits:
-
Compact size, including regenerative choke coil
-
The braking energy of the drive system is regenerated into the network
-
The regeneration power can be adjusted according to the application (for example, a 90kW drive with a 30kW regeneration unit)
-
Capacity range 4kW to 433kW
-
High flexibility: The power supply voltage range is 230, 400, 460, 500 to 690V
-
Multiple drivers can be DC coupled.
-
Low loss and high-quality IGBT modules
-
High reliability: electronic overload protection for feedback operation
-
Monitor power supply voltage, phase rotation, and temperature
-
Effective real-time control and similar functional principles, efficiency>98%
-
Realize highly dynamic braking operation
-
User friendly startup method, as no programming or setup is required
-
Significantly reduce heat loss through regenerative operation.
-
Due to the innovative concept, the power feedback unit is maintenance free
-
Duty cycle 50%
Activity Principle: Energy Recovery Module Revcon Company® RLD：
-
When torque is applied to the shaft, energy is generated from the mechanical side of the asynchronous motor.
-
Energy is fed into the DC bus through a frequency converter.
-
The voltage in the DC bus of the inverter and regeneration unit increases.
-
The energy is fed back to the mains through the energy recovery module.
Operating Instructions - Regeneration Unit REVCON RLD - Short term Braking
Data Sheet - Regeneration Unit REVCON RLD - Short term Braking
Regeneration unit RLD
Regeneration units for elevators, crane systems, centrifuges, etc
Compared to the brake chopper, theRevcon Corporation® RLDIt uses regenerative braking instead of converting energy into heat.Energy is fed into the network through an appropriate inversion process.The feedback process of continuous startup will generate a small voltage rise on the DC bus.
The regeneration unitRevcon Corporation® RLDThe rated power of RLD models designed for non continuous regeneration operations, such as elevators, crane systems, centrifuges, etc., is peak braking power and can be used for a typical duty cycle of 50%.The waveform of the regenerative current corresponds to the waveform of the input current of the converter, making it suitable for standard industrial networks.
Benefits:
- Compact size, including regenerative choke coil
- The braking energy of the drive system is regenerated into the network
- The regeneration power can be adjusted according to the application (for example, a 90kW drive with a 30kW regeneration unit)
- Capacity range 4kW to 433kW
- High flexibility: The power supply voltage range is 230, 400, 460, 500 to 690V
- Multiple drivers can be DC coupled.
- Low loss and high-quality IGBT modules
- High reliability: electronic overload protection for feedback operation
- Monitor power supply voltage, phase rotation, and temperature
- Effective real-time control and similar functional principles, efficiency>98%
- Realize highly dynamic braking operation
- User friendly startup method, as no programming or setup is required
- Significantly reduce heat loss through regenerative operation.
- Due to the innovative concept, the power feedback unit is maintenance free
- Duty cycle 50%
Activity Principle: Energy Recovery Module Revcon Company® RLD：
- When torque is applied to the shaft, energy is generated from the mechanical side of the asynchronous motor.
- Energy is fed into the DC bus through a frequency converter.
- The voltage in the DC bus of the inverter and regeneration unit increases.
- The energy is fed back to the mains through the energy recovery module.
Operating Instructions - Regeneration Unit REVCON RLD - Short term Braking
Data Sheet - Regeneration Unit REVCON RLD - Short term Braking
