Sheep pellet machine

　　Sheep pellet machineForFeed equipmentThe role of the device is very important, so we need to do a good job in daily inspection and maintenance of the equipment. Next, the editor will introduce it to you:

1、 Daily inspection work content

Do a good job in data monitoring; Measure the hydrodynamic surface after stable production; Monitor and record oil pressure.

2、 Daily maintenance work content

The top of the drive head when pulling out the light rod should not exceed 60cm; if it is necessary to pull out the rotor from the stator for backwashing, ensure that all personnel are away from the polishing rod when pulling out, and do not leave tools (such as wrenches) on the rod before pulling out the rotor.

3、 Fault analysis

If the oil leakage is severe, tighten the wrench; If the oil pressure and current fluctuate, it means that the operation of the sheep pellet machine is restricted. The main reason is that too much sand enters the pump body and deposits. The light rod can be pulled to the coupling, and the pump body can be backwashed.

If the delivery rate of the pump body decreases, it may be caused by the wear of parts such as the stator and rotor of the sheep pellet machine, so it is necessary to replace the parts and do a good job of daily lubrication.