Product Categories

From the Instrument Marketing Center website

E-mail
1718261188@qq.com
Phone
Address
190 Guangzhong West Road, Shanghai

Contact Now

Shangyi Sixth Factory

NegotiableUpdate on 12/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The digital display instrument of Shangyi Sixth Factory adopts * SMT surface mount technology and uses * switch power supply, making the instrument appear more lightweight

Product Details

Shangyi Sixth FactoryDigital display device主要性能特性

·Adopting SMT surface mount technology

·Using * switch power supply to make the instrument appear more lightweight

·Having full input function not only enables the instrument to have multiple uses, but also increases its flexibility.

·It has power failure protection function.

·The accuracy is 5% FS ± 1ding

·Two sets of circuit breakers can be flexibly used for output, which can be used for alarm and adjustment.

·The range can be freely shifted during linear input.

·Has a high cost performance ratio.

·Clear and intuitive presentation

·Reliable and practical instrument installation structure.

·The resolution is 14 bits

·Equipped with sensor error correction function.

● Input format

thermocouple

B:0～1800℃ S:0～1600℃

K:0～1300℃ E:0～800℃

T:0～300℃ J:0～800℃

Wu-Re3-25 0～2000℃

Thermal resistance:

Pt100：-100～200℃

-200～600℃

Cu50：0～150℃

Linear input

mV输入： 0～100mV. DC; 0～50mV. DC; 0～100mV. DC;

Voltage input: 0-5V. DC; 1～5V.DC;

Current input: 0-100mA.DC; 4～20mA.DC;

Resistance remote transmission pressure signal: 0~400 Ω

Radiation temperature sensor:

WFT-202(F₁Quartz glass) 400-1200 ℃

WFT-202(F₂，K₉Glass) 700-2000 ℃

● Output form of digital display instrument

The output of the two sets of relay contacts can be arbitrarily composed in the following ways:

1. Upper limit alarm

2. Lower limit alarm (two position control)

3. Upper and lower limit alarms (three position control)

4. Upper and upper limit alarms

5. Lower and lower limit alarms

The insensitive area of each contact is adjustable from 0 to 9999

The capacity of each contact is 3A, 220V AC, with no inductive load.

● Power supply for digital display instrument

Transformer power supply: 220V ± 10% 50Hz~60 Hz

Switching power supply: 86V~264VAC 50Hz~60 Hz

Power supply for transmitter: 24V, 30mA.DC

Model representation of digital display instrument

X □ M - □ □ - D

X	Specifications									content
	Z									Single display
	T									With adjustment
	Instrument form	M
			A							16080 (mm) vertical type A (H)
			D							96×96（mm）
			E							72×72（mm）
			F							4896 (mm) vertical is F (H)
			Overall dimensions	-
					1
						0				Upper and upper limit alarms
						1				Upper and lower limit alarms
						2				Lower and upper limit alarms
						3				Lower and lower limit alarms
						Adjustment mode/alarm mode	0			Full input
							1			thermocouple
							2			thermal resistor
							4			Remote pressure gauge
							5			Linear input
							6			Radiation thermometer
								-
									Additional features	Equipped with 24V transmitter power supply

X	□	M	□	-	1	□	□	-	D

Note: Users should specify the specific model when placing an order, and set it according to that model when leaving the factory. If the specific model and specifications are not specified, set it according to the factory values in the manual.

□ Panel display function