-
E-mail
1718261188@qq.com
- Phone
-
Address
190 Guangzhong West Road, Shanghai
Product Categories
From the Instrument Marketing Center website
Shanghai Instrument Sixth Factory
NegotiableUpdate on 12/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The temperature inspection instrument of Shanghai Instrument Sixth Factory is made of dedicated chips, with a high degree of intelligence, small size, and reliable installation structure.
Product Details
Shanghai Instrument Sixth FactoryTemperature巡检仪Main performance characteristics
·The accuracy is ± 0.5% FS ± ldig.
·Made with dedicated chips, it has a high degree of intelligence.
·1-6 channels can be freely selected, and manual/automatic inspection can be switched.
·Each channel can have its upper and lower limits set arbitrarily, and there are 4 reminder contact outputs.
·Product features: small size, reliable installation structure.
● Input form of temperature inspection instrument
thermocouple
B：0～1800℃ S：0～1600℃
K：0～1300℃E：0～800℃
T：0～400℃J：0～1000℃
EA：：0～800℃N：0～1300℃
thermal resistor
Ptl00: -199.9~6000C
Cul00：-50～150℃
Cu50：-50～150℃
BA1：-199.9～600℃
BA2：-199.9～600℃
DC voltage
0～20mV，0～100mV，0～5V，1～5V
Self flowing current
0~20mV，0~100mV，0~5V，1~5V
Others:
Remote transmission pressure gauge 0-400 Ω, frequency 0.01-10000Hz
Note: The measurement range of DC current, DC voltage, and remote pressure gauge can be programmed freely.
● output format
call the police
This instrument has four sets of contact outputs that can work in the following three modes
·Unified reminder: At 16:00, the upper and lower limit reminder points are uniformly set with two relay outputs.
·The 1-16 reminder points (upper and lower limits) can be set with different values, and as long as one of them exceeds the limit (upper or lower limit) and the two relays have corresponding outputs.
·4-channel inspection reminder and l2 inspection display: The first four channels can each use a separate set of relays for reminder or control, while the remaining 12 channels are used for patrol inspection.
Note: One or two modes can add two real-time reminders, which users can use as needed.
The relay contact capacity is 3A, 200V AC.
● Power supply for temperature inspection instrument
220V±10％AC 50Hz±5％
□Temperature巡检仪Model representation
X M D – 1 6□ / □ □ □
| X | M | D | Specifications | content | ||||||
| - | ||||||||||
| 16 | Number of inspection routes (1-16 routes) | |||||||||
| A | 160 × 80mm horizontal | |||||||||
| H | 80 × 160mm vertical type | |||||||||
| F | 96×96mm | |||||||||
| Overall dimensions | / | |||||||||
| 0 | none | |||||||||
| 1 | Unified alarm for upper and lower limits, output of upper and lower limit relays J1 and 2 | |||||||||
| 2 | Independent upper and lower limit alarms, upper and lower limit relays J1 and 2 output | |||||||||
| 3 | *4-channel inspection alarm J1-J4 relay output, 12 channel inspection display | |||||||||
| alarm method | 1 | thermocouple | ||||||||
| 2 | thermal resistor | |||||||||
| 3 | other | |||||||||
| 5 | current signal | |||||||||
| 7 | voltage signal | |||||||||
| input format | Design Serial Number | |||||||||
| X | M | D | - | 16 | □ | / | □ | □ | □ | |
Note: Strike*Number onlyATheHDimensions of the shape.
□ Temperature巡检仪terminal block diagram
X M D -16A/H
X M D -16 F
□ Temperature巡检仪 Panel display function
Note: Pressing the A/M key in the set state will set the program back one step
Press the SET key simultaneously to exit the setting midway
□Temperature巡检仪Appearance and opening size unit: mm
