Semi automatic closed flash point tester

The manufacturing of this instrument complies with the method specified in the national standard GB/T261-2008 "Determination of Flash Point of Petroleum Products (Closed Cup Method)". It measures the lowest temperature of the test oil (i.e. the flash point of the petroleum product sample) when the mixed gas formed by the test oil vapor and the surrounding air is heated in a closed oil cup and comes into contact with a flame to produce a flash fire

Specification:

Working power supply: AC 220V ± 10%, 50Hz.
Heating device: ⑴ The furnace body is made of silicon carbide material, with a power of 600W electric heating wire.
The heating power can be adjusted from 0 to 600W.
Sample heating rate: 1-12 ℃/min.

Electric mixing device: ⑴ Mixing motor: Constant speed motor.
⑵ Transmission mode: Soft shaft connection.
⑶ Mixing blade specification: 8 × 40 (mm).
Standard oil cup: ⑴ Inner diameter: 50.8 millimeters.
⑵ Depth: 56 millimeters.
⑶ Depth of oil testing capacity marking line: 34.2 millimeters.
⑷ Oil testing capacity: approximately 70 milliliters.
Ignition device: ⑴ Ignition source: Gas
⑵ Igniter aperture: 0.8 millimeters.
Temperature gauge: Internal standard mercury thermometer, in accordance with the provisions of GB514.
⑴ Scale -30 to 170 ℃, with a scale of 1 ℃.
⑵ Scale 100-300 ℃, with a scale of 1 ℃.
Environmental temperature: ≤ 35 ℃.
Relative humidity: ≤ 85%.
Power consumption of the whole machine: not exceeding 650W.