Selling CESCO Magnetic Separators

Selling CESCO Magnetic Separators

Selling CESCO Magnetic Separators

MicroFUSION single-phase single-phase phase angle, zero crossing, zero crossing transformer mode, fast zero crossing AC 8 400

MicroFUSION is an ultra compact high-performance digital SCR controller that can adapt to both analog and digital environments.

FUSION single-phase (AC) power controller 500-1200A single-phase phase angle, zero crossing, fast zero crossing AC 500 1 200

24-600 volts AC. A microprocessor based SCR controller that can operate analog and digital interfaces. A phase angle or zero crossing trigger controller that linearly controls the AC voltage, current, or actual power applied to an electrical load relative to a set point. Control is achieved through a pair of SCR connected in reverse parallel.

CESCO Magnetic Liquid or Slurry Magnetic Separators

MagTraps is a popular brand of magnetic separators for liquids, slurries, and pumped block products in North America. There are over 30 ready-made models of these magnetic field traps, and an unlimited number of customized configurations can be provided when manufactured according to customer specifications.

The standard size for pipelines ranging from 1/2 to 6 inches. Metal waste and fine particles, including work hardened stainless steel as small as 0.0001 inches, are captured and fixed in place by rare earth neodymium magnets until they are cleaned up. Powered by proprietary, easy to clean tube or plate circuits, with a working pressure of 750 PSI and a temperature of 500 ° F.

All CESCO MagTraps are hygiene certified to meet or exceed current USDA and 3A standards.

CESCO Magnetics Model 125

CESCO Magnetics Model 115

CESCO Magnetics Model 170

CESCO Magnetics Model 135

CESCO Magnetics model 135ec

CESCO Magnetics Model 110

ADSENS magnetic sensor

ADSENS Fluid Power Accessories

Adsens precision pressure switch

Adsens circular connector

BK - Circular cylinder clamp suitable for CS-05 and CS-15

BKC-1- Circular cylinder clamp (4mm C-slot) suitable for CS-07 and CS-77

BKC-1- Circular cylinder clamp (4mm C-slot) suitable for CS-07 and CS-77

BKT-1- Circular cylinder clamp (T-shaped groove) suitable for CS-65 and CS-75

BKT-1- Circular cylinder clamp (T-shaped groove) suitable for CS-65 and CS-75

BL-1- Circular cylinder clamp suitable for CS-40 and CS-50

BL-1- Circular cylinder clamp suitable for CS-40 and CS-50

BS-CS-48 uses circular cylinder clamps

CR Magnetics， The limited liability company has been operating since 1986 and is located in downtown St. Louis, Missouri, where we have a 40000 square foot manufacturing facility and warehouse. CR Magnetics also has manufacturing and sales offices in East Asia, Europe, and the Americas.

CR Magnetics complete team

The philosophy of CR Magnetic is to provide a complete set of products and components that enable our customers to solve the challenges they face in a constantly changing competitive environment. With the rise of energy costs and the decline of profit margins, maintaining the efficiency of operations, processes, and capital equipment is the most concerning issue for industrial and equipment engineers today. While we strive to provide cost-effective and the most complex products, we also offer professional engineering assistance when clients handle challenging applications. Our OEM support is also a major advantage, enabling OEMs to produce customized designs at low cost.

Recognizing the need for more products and improved customer support, CR Magnetics， The limited liability company is now Khocorporate Holdings, a wholly-owned subsidiary of the limited liability company family. Khorporate Holdings， The limited liability company has been highly respected in its industry for over 40 years. Their expertise in distribution, customer service, and manufacturing will only help CR Magnetics continue to provide high-quality products quickly at competitive prices. The limited liability company has passed the ISO9001:2008 quality management system.

CR45 current loop

The CR45 current loop was released in 1986

Nowadays, CR Magnetics provides a full range of sensors, transducers, and components needed in today's industry. Our new current marker indicator and display further demonstrate our sustainability. Our full range of analog sensors, ANSI and commercial grade current transformers, medium voltage products, power meters, and universal components provide any user with the tools needed to improve any application. Our engineers are always ready to answer any questions, and we will not rest until we provide the right product for the right job at the right price. Call us today to learn why CR Magnetics is a professional energy monitoring expert.

CR Magnetics focuses on services and technology

Professional Engineer

CR Magnetics' employees include engineering and technical professionals with a century of experience in the electrical monitoring and power measurement industry. This experience provides our clients with solutions to their most difficult application challenges.

Our NIST traceability laboratory consists of six testing stations, each with a laboratory level closed-loop control power system reference used to provide accurate baseline inputs for the correct calibration of all our products. These stations can create the same situation that our customers face on site, including any voltage, current, or frequency level. The shape and form of these signals can also be adjusted to provide response data for our products in these situations. CR Magnetics also maintains appropriate power meter testing equipment designed to meet the parallelogram method of ANSI grade meters, as well as an engineering based testing system for verifying phase angle offsets through initial inductance measurements of our sensing transformers. These workstations are specifically designed to provide the correct specifications for our products in unique or common applications.

certification

All CR Magnetics parts comply with RoHS requirements for lead-free and other hazardous chemicals. The products we welcome have obtained CE, UL, and CSA certifications. Our facilities also include necessary equipment, including pressure cooker testing, environmental testing, and load testing, to provide customers with the necessary information and sources when exploring customized solutions that require institutional approval. Our experience working with certification bodies makes it easier and faster to implement new and exciting monitoring solutions.

CR Magnetics' employees include quality control and assurance personnel. These personnel have no other functions besides ensuring that our products maintain a high level of quality. All quality issues are summarized by customers, employees, and suppliers. The maintained documents include customer complaints, corrective actions, and traceable materials from suppliers to customers. Statistical process control is used for winding, potting, and calibration areas, controlled by recorded settings, and regularly revalidated. All programs are maintained and referenced in the industry standard quality manual.

CRD5110 single element dual line multifunctional digital sensor

CRD5110

CRD5100 series

Data Stream ASCII Programming Guide

Mod bus protocol for data flow

The CRD5100 series data stream digital sensor is designed specifically for comprehensive monitoring of power systems. Digital technology is used to measure voltage, current, power frequency, and energy in single-phase and three-phase designs. The data is transmitted via RS485 IEEE bus, enabling multiple sensors to communicate through a single main connection. These sensors are an ideal choice for monitoring the entire factory or area. In addition, communication algorithms can pre order control based on ASCII or control based on modified MODBUS.

HYDRAULIC PUMP 300-375RPM

True RMS AC Current Sensor - Single Element -0~5VDC Output

CR4210

Self powered AC current sensor -0~5VDC output

CR4220

Loop powered AC current transmitter - single element - with 4~20mADC output

CR4260

Loop powered AC current transmitter - dual element - with 4~20mADC output

CR4410

Average RMS AC Current Sensor - Single Element -0~5VDC Output

CR5210

DC Hall Effect Current Sensor - with+/-5VDC Output

CR5410

AC/DC Hall Effect Current Sensor - with ± 5 VAC/VDC Output

CR4110S

Real RMS AC split core current sensor -0~5VDC output

CR4150

True RMS AC current sensor - dual element -0~5VDC output

CR4170

True RMS AC current sensor - three elements -0~5VDC output

CR4210S

Self powered AC current sensor - split iron core -0-5VDC output

LU100/ED23.5/ECO (2045) Plurite 100W High Pressure Sodium Lamp

CR4150

True RMS AC current sensor - dual element -0~5VDC output

CR4170

True RMS AC current sensor - three elements -0~5VDC output

CR4210S

Self powered AC current sensor - split iron core -0-5VDC output

CR4220S

Loop power supply, split core, AC current sensor - single element - with 4-20mADC output

CR4410S

Split type AC current sensor - single element -0~5VDC output

CR4450

Average RMS AC current sensor - dual element -0~5VDC output

CR4470

Average RMS AC current sensor - three elements -0~5VDC output

CR4510

True RMS AC voltage sensor - single-phase -0~5VDC output

CR4560

True RMS AC voltage sensor -3-phase 3-wire - with 4~20mADC output

CR4580

True RMS AC voltage sensor -3-phase 4-wire - with 4~20mADC output

CR4810

Average RMS AC voltage sensor - single-phase -0~5VDC output

CR4860

Average RMS AC voltage sensor -3-phase 3-wire (triangular) -4-20mADC output

CRD5110

Single element dual line multifunctional digital sensor

CRD4110

Single element data flow digital current sensor

CRD4510

Single unit AC voltage RS485 digital sensor

CRD5150

Dual element, three-phase, three wire multifunctional digital sensor

CRD4150

Dual element data flow digital current sensor

CRD4550

Dual element three wire AC voltage RS485 digital sensor

CRD5170

Three element, three-phase, four wire multifunctional digital sensor

CRD4170

Triple stream digital current sensor

CRD4570

Three element four wire RS485 AC voltage digital sensor

Plusrite

Plurite 100 watt HPS bulb, S54， Transparent, 2000K color temperature, ED23.5 shape, 9500 lumens, Mogul (E39) base Plurite 100W S54 HPS lamp LU100: 100W HPS lamp ED23.5: bulb shape ECO: meets TCLP standards

BS16-2045

70/ED17/MED

LU70/ED17/MED (2002) Plurite 70W high-pressure sodium lamp

Plusrite

Plurite 70 watt HPS bulb, S62， Transparent, 2000K color temperature, ED17， Medium (E26) Base Plurite 70W S62 HPS Lamp LU: HPS Lamp ED17: Bulb Shape MED: Medium (E25) Base

BS16-2002

LU400/ET18/ECO

LU400/ET18/ECO (2048) Plurite 400W high-pressure sodium lamp

Plusrite

Plurite 400W HPS bulb, S51， Transparent, 2000K color temperature, ET18, Mogul (E39) base Plurite 400W S51 HPS lamp LU: HPS lamp ET18: bulb shape ECO: compliant with TCLP standard

BS16-2048

50/ED17/MED

LU50/ED17/MED (2001) Plurite 50W high-pressure sodium lamp

Plusrite

Plurite 50 watt HPS bulb, S68， Transparent, 2000K color temperature, ED17， Medium (E26) Base Plustrite 50W S68 HPS Lamp LU: HPS Lamp ED17: Bulb Shape MED: Medium (E25) Base

BS16-2001

LU250/ET18/ECO

LU250/ET18/ECO (2047) Plurite 250W High Pressure Sodium Lamp

Plusrite

Plurite 250 watt HPS bulb, S50， Transparent, 2000K color temperature, ET18, Mogul (E39) base Plurite 250W S50 HPS lamp LU: HPS lamp ET18: bulb shape ECO: compliant with TCLP standard

BS16-2047

LU35/ED17/MED (2000) Plurite 35W high-pressure sodium lamp

LU35/ED17/MED (2000) Plurite 35W high-pressure sodium lamp

Plusrite

Plurite High Pressure Sodium (HPS) bulb, 35W S76, transparent, 2000K color temperature, ED17， Medium (E26) base Plurite 35W S76-HPS lamp LU: HPS lamp ED17: bulb shape MED: Medium (E25) base

BS16-2000

LU1000/ET25/ECO (2050) Plusite high-pressure sodium lamp -1000W S525 ET25 E39 base

LU1000/ET25/ECO (2050) Plusite high-pressure sodium lamp -1000W S525 ET25 E39 base

Plusrite

Plurite 1000 watt HPS bulb, S52， Transparent, 2000K color temperature, 130000 lumens, ET25, Mogul (E39) base Plustrite 1000W S52 HPS lamp 1000W HPS LU: HPS lamp ET25: bulb shape ECO: TCLP compatible with 2000K color temperature E39 Mogul base universal. ..

BS16-2050

Howard LU70 is a 70W 6200 HPS bulb with an ED23.5 bulb shape and a Mogul base. It has a smooth surface and a color temperature of 2100K. The Howard 70W HPS bulb has an Ansi code ED23.5 bulb shape and a Mogul (E39) base with a transparent 2100K color temperature and 22 color rendering...

HL-LU70

Howard LU100/MED is a 100W S54 HPS bulb with ED17 bulb shape, medium base, transparent surface, and 2100K color temperature. Howard 100W HPS lamp S54 Ansi code ED17 bulb shape medium (E26) base transparent 2100K color temperature 22 colors. ..

HL-LU100/MED

LU150/ED17/MED (2004) Plurite 150W high-pressure sodium lamp

Plusrite

Plurite 150 watt HPS bulb, ANSI S55， Transparent, 2000K color temperature, ED17， Medium (E26) base Plustrite 150W S55 HPS lamp LU: HPS lamp ED17: bulb shape MED: Medium (E25) base

BS15-2004

LU100/ED17/MED (2003) Plurite 100W high-pressure sodium lamp

Plusrite

Plurite 100 watt HPS bulb, S54， Transparent, 2000K color temperature, ED17， Medium (E26) base Plurite 100W S54 HPS lamp LU: HPS lamp ED17: bulb shape MED: Medium (E25) base

BS16-2003

LU70/ED23.5/ECO (2044) Plurite 70W High Pressure Sodium Lamp

Plusrite

Plurite 70 watt HPS bulb, S62， Transparent, 2000K color temperature, ED23.5, Mogul (E39) base Plurite 70W S62 HPS lamp LU: HPS lamp ED23.5: bulb shape ECO: compliant with TCLP standards

BS16-2044

CEA Instruments remote sensing/transmitter unit

CEA 420

CEA 420 series:

(Click on the product name or image to learn more details)

The independent transmitter unit can be equipped with the same unique sensors as the U series

Provide digital display and non display versions

Explosion proof enclosures for sensors and transmitters

Single shell for 12V version (otherwise as shown in the figure, other versions of power transformers are connected in series)

Continuous 4-20mA signal output to the controller

Reliable, responsive, and highly specific

Low cost, easy to use and maintain

Affordable infrared carbon dioxide monitoring device

CEA 144

CEA 144：

(Click on the product name or image to learn more details)

The standard range is 0-2000ppm, 0-5000ppm, 0-1%, 0-2%,

0-5%, 0-10%, and 0-100% volume available

Use high-quality sensors for continuous monitoring

Optional relay contacts

Extremely lightweight, durable, and accurate

0-1V and 4-20mA outputs with optional relays

Filters protect sensors from dust and smoke

Low maintenance cost, only requiring calibration once a year

Portable landfill sites are rich in methane gas,

Carbon dioxide and oxygen analyzer

LFG-20+

LFG-20+：

(Click on the product name or image to learn more details)

Only measure methane, carbon dioxide, and oxygen

Accurately monitor and display all three gases simultaneously

Infrared technology for 0-100% volume analysis of CH4 and CO2

Electrochemical cell for monitoring 0-25% oxygen volume

Built in data logger option with PC download software

Built in air pump and self diagnostic function, very convenient to use

Compact design, lightweight, and reliable technology

Comes with a carrying case and battery charger/power supply

CEA Instruments Compact Portable Wall Mounted Infrared Gas Analyzer

1000 pounds and 2000 pounds

SB1000 and SB2000:

(Click on the product name or image to learn more details)

The RI-555 has finally been replaced by these new series of low-cost, more compact devices with better functionality and flexibility!

The portable SB1000 and wall mounted SB2000 infrared gas analyzers can be used for percentage (%) monitoring of one of the following:

carbon monoxide

carbon dioxide

methane

ammonia

nitrous oxide

sulfur dioxide

ethylene

ethane

propane

butane

pentane

Suitable for other gases

Independent new single beam infrared technology

Other analyzers have a huge gas range, typically from 0-0.5% to 0-100% of the full range

Dual gas version with added oxygen or electrochemical sensors

Digital display, built-in sample pump, and audio/video gas alarm

Optional 4-20mA or 0-1VDC linear output

Compact, highly reliable, and validated design

Single AC power supply, 24 VDC (SB2000) and/or battery (SB1000) operation

SB2000 wall mounted allows setting all functions through remote PC connection

SB2000 wall mounted provides automatic zero adjustment function, with a calibration cycle of 6 months

SB1000 portable provides range and zero adjustment through an external potentiometer

Easy to calibrate and operate

Control Concepts Phase Angle SCR Controller

Control Concepts Zero Crossing SCR Controller

Control Concepts Simulate SCR Controller

Control Concepts Solid State Relay Controller

Control Concepts Digital SCR Controller

ATOM single-phase power controller single-phase phase angle, zero crossing, fast zero crossing, SSR zero crossing, SSR random, half cycle DC AC, DC 16 65

ATOM is an ultra compact high-performance digital SCR controller designed to control AC or DC loads.

BS-CS-48 uses circular cylinder clamps

CS-05- Suitable for small circular cylinders

CS-05- Suitable for small circular cylinders

CS-06- Suitable for 4mm square groove

CS-06- Suitable for 4mm square groove

CS-07- Suitable for 4mm C slot

CS-07- Suitable for 4mm C slot

CS-1000D-Welding Field Immunosensor (Fixture Installation)

CS-1000D-Welding Field Immunosensor (Fixture Installation)

CS-1001D Welding Field Immunosensor (4mm C slot)

CS-1001D Welding Field Immunosensor (4mm C-slot)

CS-11- Suitable for AirTAC, Koganei grooves

CS-11- Suitable for AirTAC, Koganei grooves

CS-15- Suitable for small circular cylinders

CS-15- Suitable for small circular cylinders

CS-16- Suitable for 4mm C slot

CS-16- Suitable for 4mm C slot

CS-18- Suitable for 4mm C slot

CS-18- Suitable for 4mm C slot

CS-21- Suitable for circular and tie rod cylinders

CS-21- Suitable for circular and tie rod cylinders

CS-28 Magnetic proximity sensor

CS-28 Magnetic proximity sensor

CS-30- Suitable for 1/4 "and 3/8" dovetail slots

CS-30- Suitable for 1/4 "and 3/8" dovetail slots

CS-31- High temperature (bracket or fixture installation)

CS-31- High temperature (bracket or fixture installation)

Digi-Stem ® Process thermometer

Thermal probe ® Handheld instrument panel

Heat Prober ® Handheld probe

Heat Spy ® Handheld infrared

Palmer Wahl Hot Spy ® thermal imaging camera

Palmer Wahl Hot Spy ® Fixed infrared sensor

Palmer Wahl Industrial Temperature Gauge

Palmer Wahl thermometer sleeve

Palmer Wahl temperature sensor

Palmer Wahl utility thermometer

Palmer Wahl filling system dial thermometer

Palmer Wahl bimetallic thermometer

Custom designed temperature sensor components

Custom designed temperature sensor components

Industrial RTD probe

Industrial RTD probe

WR1 or WT1 standard series

Industrial thermocouple probe

Sensor connectors for TC or RTD sensor components

Sensor connectors for TC or RTD sensor components

S-Products Head Mounted Transmitter

S-Products Head Mounted Transmitter

S Products rail or wall mounted transmitters

S Products rail or wall mounted transmitters

S-Products transmitter accessories

S-Products transmitter accessories

Sensor connector terminal block

Sensor connector terminal block

transmitter

transmitter

Inor digital head mounted temperature transmitter

Inor digital head mounted temperature transmitter

Inor Head mounted HART Intelligent Temperature Transmitter

Inor Head mounted HART Intelligent Temperature Transmitter

Inor Head mounted Dual Input HART Intelligent Temperature Transmitter

Inor Head mounted Dual Input HART Intelligent Temperature Transmitter

Inor transmitter configuration kit

Inor transmitter configuration kit

PR Electronics on-site installation of transmitters

PR Electronics on-site installation of transmitters

PR electronic head mounted transmitter

PR electronic head mounted transmitter

Digi-Stem ® Process thermometer

Digi-Stem ® Temperature system, providing thermocouple and RTD models with fixed and remote probes. Provide dedicated models for intrinsic safety environments and minimal recording. Made in the United States.

DST700 Wahl Digi-Stem ® Digital thermometer with LCD display and sturdy stainless steel casing

DST700 Wahl Digi-Stem ® Advanced RTD digital thermometer with data logger and optional transmitter and switch module

Digi-Stem ® DST700 series advanced RTD probe

Digi-Stem ® DST700 series advanced RTD probe

DST600

Digi-Stem ® DST600 and DST640 series RTD thermometers

Digi-Stem ® DST600 and DST640 series RTD probes

Digi-Stem ® DST600 and DST640 series RTD probes

Digi-Stem ® DST610 and DST650 series RTD thermometers with dual sensors and outputs

Digi-Stem ® DST610 and DST650 series RTD thermometers with dual sensors and outputs

Digi-Stem ® DST610 and 650 series RTD probes

Digi-Stem ® DST611 and DST651 series RTD thermometers with dual sensors and outputs

Digi-Stem ® DST611 and DST651 series RTD thermometers with dual sensors and outputs

Digi-Stem ® DST611 and 651 series RTD probes

DST620

Digi-Stem ® DST620 and DST660 series RTD thermometers with dual sensors and transmitters

Digi-Stem ® DST620 and 660 series RTD probes

Digi-Stem ® DST620 and 660 series RTD probes

dst621

Digi-Stem ® DST621 and DST661 series RTD thermometers with dual sensors and transmitters

Digi-Stem ® DST621 and 661 series RTD probes

DST500-FM with probe

Digi Stem certified by FM ® DST500-FM series RTD thermometer

DST500-FM probe

Digi-Stem ® DST500-FM series RTD probe

DST500

Digi-Stem ® DST500 and DST540 series RTD thermometers

Digi-Stem ® DST500 and DSX500 series RTD probes

Digi-Stem ® DST500 and DSX500 series RTD probes

DSX500_ meters

Digi-Stem ® DSX500, DSX540, DSX501 series RTD thermometers with 4-20mA transmitter

placeholder

Digi-Stem ® DSX500 series RTD probe

DST550_ Belt Belt Belt

Digi-Stem ® DST550 series minimum large record RTD thermometer

placeholder

Digi-Stem ® DST550 series RTD probe

DST400

Digi-Stem ® DST400 thermocouple thermometer

Digi-Stem ® DST400 series thermocouple probe

Digi-Stem ® DST400 series thermocouple probe

Data recording software for advanced Digi Stem series

Data recording software for advanced Digi Stem series

DSA3030 bracket

Digi Stem Wall Mounted Bracket

DSA3030 bracket

Digi Stem Wall Mounted Bracket for DST700

placeholder

Digi Stem Wall Mounted Bracket with Grounding Patch

placeholder

DST610/611, DST620/621, DST650/651, and DST660/661 replacement probe cables

13146X 90 ° elbow

90 ° elbow of rigid femoral stem prosthesis model

Digi-Stem ® Instruments and probes are sold separately and can be customized into a system. Wahl DST600 Series Digi Stem ® Mainly designed as a distillation thermometer, it is very suitable for critical applications, considering low acid canned food processing. The DST600 series is a reliable and safe option with self checking technology that continuously verifies the accuracy of its electronic devices and indicates any deviation by displaying "Err" on the screen. The unique probe ID function prevents unauthorized probes from connecting to the instrument.

The DST600 series uses high-precision and high reliability components to meet the requirements of the US Food Final Rule 21 CFR Part 113, which replaces traditional mercury in glass thermometers with digital distillation thermometers.

The Pt1004 wire platinum RTD sensor filled with MgO in MI cable has a wide temperature range and high-precision design, suitable for applications that require accurate and reliable temperature monitoring. Choose from rigid, remote, or adjustable angle RTD probes, which are customized and sold separately according to customer specifications. The DST600 series has a programmable "R0" function, which is used to "match" sensors with instruments.

Our Digi Styles ® Known for its reliability and sturdy casing. The casing is made of NEMA-4X grade stainless steel. The dimensions are 5.3 inches wide x 4.3 inches high x 2.7 inches deep (13.5 centimeters wide x 10.9 inches high x 6.9 centimeters deep). A 1-inch high large LCD display can be read from 30 feet away. Optional panel installation is also available.

Polycarbonate H-frame is standard configuration; Choose DST640 with laser welded stainless steel H-frame to provide additional protection against radio frequency interference and moisture intrusion.

The standard model is powered by a C-size, lithium thionyl chloride, 3.6V battery and shipped. Due to transportation restrictions, instruments with this battery must be transported by ground transportation. For international or air freight, select the "I" option and configure it as AA size, lithium thionyl chloride, 3.6V battery and powered by it, or select only the "NB" option and do not include batteries: purchase the required batteries from suppliers near your location.

DST600 is a device recognized by the United States; Compliant with the current 9CFR318.305 for canned meat and 9CFR381.305 for canned poultry products in the United States.

Read about our calibration of Digi Stem ® Declaration of system used as food processing TID

Our Digi Stem Instrument Selection Guide can help you choose the right instrument for your application. Click to view a side-by-side comparison of different models.

M103442

1/4 inch 1/4 inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103443

3/8 inch 3/8 inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103444

1/2 inch 1/2 inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103445

3/4 inch 3/4 inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103446

1-inch 1-inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103447

1-1/4 inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103448

1-1/2 inch color F11 angle valve. 1500 rated value, socket weld connection MIL-V-22094 colored F11 steel socket weld

M103449

2-inch 2-inch color F11 angle valve. 1500 rated value, socket welded connection MIL-V-22094 colored F11 steel socket

Tork Systems socket fittings

Tork Systems raw pipe fittings

Tork Systems welded pipe fittings

Tork Systems hose fittings

Tork Systems crimping accessories

Tork Systems silicon brazed pipe fittings

Tork Systems socket welding fittings

Tork Systems straight seam welded fittings

Tork Systems Sweating Pipe Fitting

Tork Systems Threaded Connectors

Tork Systems Thread End Accessories

Tork Systems threaded end fittings

Tork Systems threaded X hose connector

Tork Systems tubing to external thread fittings

803-1385866 pipe fittings

803-4384536 pipe fittings

803-5001057 pipe fittings

810-1385791 pipe fittings

810-1385848 pipe fittings

810-138580 pipe fittings

810-1385912 pipe fittings

810-1385941 pipe fittings

810-1385942 pipe fittings

810-1385943 pipe fittings

90/10 Copper Nickel (CuNi) Class 150/200/40 Commercial Socket Welding (SW) Flanges

70/30 copper nickel 250 grade socket welding flange plate MIL-F-20042 type

90/10 copper nickel 150 grade socket welded flange plate

90/10 copper nickel 250 grade socket welding flange

70/30 Copper Nickel Class 150 Socket Welding Flange Plate MIL-F-20042 Type

A105 Class 150 socket welded steel flange (various surface types and weights) - Domestic

70/30 copper nickel 200 grade socket welding butterfly flange 810-4715319 2C

304/316 stainless steel 150 grade socket welding flange - domestic/imported

90/10 copper nickel 200 grade socket welded butterfly flange 810-4715319 2C

70/30 Copper Nickel (CuNi) Class 150/200/700/Schedule 40 Commercial Socket Welding (SW) Flanges

Monel alloy 1500 grade socket welding flange

A105 Class 150 socket welding flange (various face types and weights) - imported

A105 steel grade 600 ultra heavy socket welding flange, convex surface

150 grade socket welding flange

Aluminum 5086 Class 150 socket welding flange

304/316 stainless steel 150 grade socket welding flange

6061 Class 150 aluminum socket welding flange

70/30 copper nickel 300 grade socket welding flange

90/10 copper nickel 300 grade socket welding flange

70/30 copper nickel 700 grade socket welding flange

70/30 copper nickel 600 grade socket welding flange

Monel alloy 150 grade socket welding flange

70/30 copper nickel 400 grade socket welding flange 4715319 9C

Chromium molybdenum F11 1500 grade ultra heavy socket welding flange, convex surface

A105 300 grade socket welded steel flange (various surface types and weights) - domestic

304/316 stainless steel 300 grade socket welding flange - domestic/imported

A105 1500 grade ultra heavy convex socket welding flange

Aluminum 6061 Class 150 socket welded flange

A105 300 grade socket welded steel flange (various face types and weights) - imported

Chromium molybdenum F11 600 grade ultra heavy socket welding flange, convex surface

Monel alloy 600 grade socket welding flange

90/10 Copper Nickel (CuNi) 400 grade socket weld (SW) flange (4715319 9C)

Steel A105 600 SW flange RF STD Dom

Aluminum 5086 300 grade socket welding flange

Monel alloy 300 grade socket welding flange

DAWN 75mm Unigrip drilling machine set 61560

DAWN 100mm drilling machine set Unigrip 60220

TURF DEVIL 链环-3/8 LP.043 56DL TD-D-043-56DL

TURF DEVIL Sharpening Kit TD236-P

TURF DEVIL 链环-3/8 LP.043 46DL TD-D-043-46DL

TURF DEVIL 链环-3/8 LP.043 52DL TD-D-043-52DL

TURF DEVIL chainsaw file-3 package TD251-3P

TURF DEVIL 链环-3/8 LP.043 40DL TD-D-043-40DL

TURF DEVIL 链环-3/8 LP.050 56DL TD-D-050-56DL

TURF DEVIL Easy Edge Cutting Machine Head TDEW109

TURF DEVIL rod and chain assembly-16D0-CL-PO and 3/8LP.050 56DL TD271-0

TURF DEVIL 链环-3/8 LP.050 62DL TD-D-050-62DL

TURF DEVIL rod and chain assembly-14D0-CL-PO and 3/8LP.050 52DL TD269-0

TURF DEVIL 链环-3/8 LP.050 44DL TD-D-050-44DL

TURF DEVIL 链环-3/8 LP.050 40DL TD-D-050-40DL

TURF DEVIL 链环-3/8 LP.043 28DL TD-D-043-28DL

Directly purchasing from European and American factories, enjoying low prices, short lead times, and 100% brand new European original procurement services. For some European and American brand products, we obtain manufacturer's best discounts through centralized bulk procurement, which can provide lower quotes than the domestic market price and maximize profits for customers. With standardized management, streamlined procurement model, sound logistics management, and excellent after-sales service, we are dedicated to serving you! All imported products from Europe and America can be purchased. As long as you provide the brand and model, leave the rest to us! In order to improve quotation efficiency, please be sure to provide brand, model, item number, quantity, or nameplate photos. For industrial products of small German and European brands that are difficult to find, we can help you find and purchase on your behalf. We have directly supplied more than 1000 European large, medium, and small enterprises to our company.