Security intelligent comprehensive integration platform

software architecture

The security integration platform must be based on third-party software, and cannot be based on alarm, video, access control and other software platforms. It will not be unable to work properly due to any subsystem or subsystem control software failure such as monitoring, access control, alarm, patrol, intercom, etc. It can also monitor the operation status of each subsystem. Once a problem occurs, it can issue a prompt for easy management and maintenance.

★

Software performance

Support concurrent login for agents: ≥ 50;
Simultaneous alarm reception capability: ≥ 100 per second;
Alarm concurrency processing capability: 5-10 per second;
Real time data transmission time of the system: ≤ 1s;
System data refresh latency: ≤ 1s;
Maximum monitoring points of the system: ≥ 100000 points;
Video latency: ≤ 200ms;
Number of concurrent notifications sent to agents: ≥ 100 per second;
Maximum concurrent number of video intercom seats: ≥ 50

★

Multi system integration

Integrated alarm system, video system, access control system, intercom system, parking lot system, fire protection system, patrol system, environmental monitoring and other subsystems.

★

Subsystem brand compatibility

The three core subsystems of alarm, video, and access control can be compatible with at least 30 well-known domestic and foreign brand products.

★

Basic functions

Compatibility of alarm subsystem

By accessing the platform through a protocol, receive information uploaded by the alarm host about arming, bypassing, and disarming. The platform can be used to arm, bypass, disarm, and disarm the alarm host (with the support of the alarm host).

Compatibility of monitoring subsystem

Exchange protocols with the monitoring system platform through protocol.

Compatibility of access control subsystem

It can exchange data with the access control system software through protocol, detect the door opening, alarm, and abnormal fault information of the access control system. For access control systems that support reverse control functions, the software can be used to open, lock, and unlock the access control system.

Electronic map function

Multi level, rich, and flexible map management functions allow direct control of data points and their associated systems on maps and data boards. The data points of third-party systems can be managed on the platform map to solve the problem of third-party systems lacking electronic maps and inflexible map functions. Unrestricted level maps can be added, and top-level maps, same level maps, and subordinate maps can be set; It is possible to manage the addition, modification, deletion, and control of map points on electronic maps; When an abnormal event occurs, an electronic map will automatically pop up. When the mouse moves to a point, it can display detailed information about the point location. Support adding jump points, which can be easily redirected to other map layers with just one click. Map points support detailed map management, click to view detailed maps of point locations.

★

One click switching point map

On any interface displaying a point, there is a right-click menu for 'Electronic Map'. After clicking, the electronic map switches to that point.

★

Data board function

Through the data board monitoring interface, various devices can be flexibly arranged for centralized monitoring (supporting multi-level data boards). Various devices can be controlled directly by clicking on icons with the mouse, such as arming, disarming, bypassing, and unlocking alarm systems, opening, locking, and unlocking access control systems, and controlling lighting through other auxiliary output linkage boards. When the mouse clicks on a point, detailed information about the point can be displayed. Support adding jump points, which can be easily redirected to other data board layers with just one click. Point supports detailed data board management, click to view the detailed data board of the point.

★

Personalized interface settings

Whether it's the platform background skin, font, status display effect, event prompt sound, etc., they can all be customized. All images and status icons can be modified, and data browsing follows the status color; Different interface background colors can be defined according to customer preferences; Different events can define different fonts (size, color, etc.).

★

Personalized multimedia voice alarm function

Support abnormal events in various subsystems such as alarm and access control, and play alarm template text and speech synthesis through multimedia voice system; And it can customize a voice module to accurately report information such as event occurrence point and event type. In addition to using a unified platform TTS template, it also supports TTS template settings. The TTS template supports four levels of priority settings: event point, event type, trigger type, and system type.

★

The sound automatically stops after handling the event

It can be set to automatically stop the sound of events that are being reminded by sound after processing is completed.

★

Automatic event sound reminder setting

The sound reminder method for automatically processing events can be defined separately.

★

Custom event name

The event content name for customizable events.

★

Custom alarm code

Customizable alarm codes and event names.

★

Custom alarm zone event name

Customizable alarm event names for alarm zones.

★

Field display adjustment

Any data browsing interface can set the displayed fields and order, or directly drag the column header to modify the display order.

★

Data list prompt

You can set whether to display the current row's data in a list format when clicking on grid data, which can provide a more intuitive way to view data records.

★

The display format of point data is the same as the display format of point status

When browsing point data, the display format of point data rows (such as font and background color) can be set to be the same as the display format of point status. Can provide a more intuitive view of the location.

★

Search for data

You can search for data by field in any data browsing interface.

★

print data

Any browsed data can be directly printed, and the records and fields to be printed can be selected, and page parameters can be set.

★

Export data

Any browsed data can be exported as three types of files: Excel, txt, and html.

★

Memory floating window position

Remember the last display position of any floating window and restore the display position on the next display.

★

Management function

Multiple warning methods

When a police incident occurs, notify the on duty personnel through pop-up warning boxes, police information processing columns, sound, electronic maps, and other methods. Users can sort by themselves according to the level of alarm or the order of alarm time.

★

Detailed police situation handling results

This includes various information records such as pre-processing, formal processing, responsible persons for processing, and processing results. Various processing results can be customized and pre entered.

automatic processing

Different alarm situations can be automatically processed by the computer to reduce the burden on operators. In addition to supporting simple setting modes by event type, it also supports advanced setting modes by point and its event type.

★

Personalized operation

Users can customize the alarm prompt sound, warning box font, and color.

★

Host users can only disarm them when an alarm is triggered

Host users can only be disarmed when an alarm is triggered, making alarm management more refined.

★

virtual user

Support defining virtual users and using software to complete the alarm host function. Only the host's alarm is used as the platform's alarm trigger access. Whether an alarm is generated depends on the virtual user's defense zone deployment status and defense zone type. Support single zone deployment and removal control.

★

Virtual user single defense zone deployment and removal

Virtual users not only support user deployment and removal of defenses, but also support deployment and removal of defense zones.

★

Overlay of defense zone status with user deployment status

The alarm zone status can be set to normal, and when the status icon is displayed, the alarm user's deployment status is attached.

★

Custom display subsystem

You can set the subsystem to be displayed on the current account interface.

★

Map points only display icons

Points on the electronic map can be set to display only icons without titles, in a more concise way. In order to avoid overlapping as much as possible when the points are very dense.

★

Custom electronic map display type

You can set which subsystem points are displayed on the electronic map when viewed manually.

★

Batch control

Multiple points that need to be controlled can be selected for batch control.

★

Other system points support arming and disarming

Provide software deployment and disarming support for collection points of other systems.

★

Alarm zones without relevant advanced settings configured, enable the corresponding alarm user settings for this zone

When setting advanced settings for unconfigured alarm zones, enable the corresponding alarm user settings for that zone. Such as automatic processing schemes, event contingency plans, TTS templates, forwarding settings, etc.

★

Linkage function

Linkage between alarm system and video system

When a preset alarm event occurs, such as alarm, arming/disarming, bypassing, or releasing the bypass, the video image can be switched, the area camera preset position can be switched, and the high-speed ball preset position can be called. Display captured video images when viewing detailed event information.

★

Linkage between access control system and video system

When a preset door event occurs, such as door opening, closing, alarm, etc., the video image can be switched, the area camera preset position can be switched, and the high-speed ball preset position can be called. Display captured video images when viewing detailed event information.

★

Linkage between alarm system and access control system

When preset alarm events occur, such as alarm, arming/disarming, bypassing, and unlocking the bypass, the access control system can be linked to open, lock, and unlock the door.

★

Linkage between access control system and alarm system

When a preset door event occurs, such as door opening, closing, alarm, etc., the alarm system can be linked to deploy/disable, bypass, release bypass, and deploy/disable the defense zone.

★

Other expandable subsystems are linked with the video system

When preset events occur in the parking lot system, fire protection system, patrol system, and environmental monitoring subsystem, they can be linked to the video system to switch video images, switch area camera preset positions, call high-speed ball preset positions, etc. Display captured video images when viewing detailed event information.

★

Linkage between other expandable subsystems and access control system

When preset events occur in the parking lot system, fire protection system, patrol system, and environmental monitoring subsystem, the access control system can be linked to open, lock, and unlock the doors.

★

Other linkage

Various subsystems integrated on the platform can flexibly formulate corresponding linkage rules as needed. After triggering a certain event on a device, the device can be selected to directly set the linkage action. Any linkage can be defined between different subsystems, even within the same subsystem.

★

Map based linkage settings

When setting up linkage, you can directly select points on the map in a more intuitive way.

★

View point linkage settings

On any interface displaying a point, there is a right-click menu called 'View Linkage Settings', which displays all linkage actions for that point when clicked.

Linkage TTS

Can set up linked TTS to complete some special reminders, with extremely flexible usage and a lot of imagination space.

★

Special linkage settings

Special linkage settings can be set for alarm users, access control, parking lots, and other systems (bringing very special linkage functions. For example, a user can make a special linkage after operating the host; a special linkage can be made for a certain car; a special TTS sound reminder can be made after facial recognition of a certain person).

★

Import linkage settings

Support importing linkage relationships from Excel, greatly reducing the workload of linkage setting input during project implementation.

★

Linkage record

All linkage actions of the platform can be recorded in detail.

★

Linkage output point supports on/off for N seconds

For devices whose hardware does not support turning on/off for N seconds, all software implementations have been added (use case: after an alarm is triggered, the alarm will sound for N seconds to avoid prolonged ringing and causing panic among personnel, especially in unmanned situations).

★

Point linkage

By setting up linkage settings for point to point linkage, you can right-click on the map, data points, and event processing to perform point linkage. It can be set whether to perform point linkage corresponding to a map point when clicking on it on the electronic map (excluding matrix cameras and linkage output points). Typical case: Using point linkage to adjust videos from multiple nearby cameras.

★

Point control

By setting the linkage settings for point control, you can right-click on the corresponding point control on the map, data board, and during event processing. Each subsystem point supports up to 10 types of point controls, with a total control that can execute all defined point controls at once. For example, defining the relevant controls for opening and closing camera positions, such as opening and closing doors, in order to quickly control event points. Typical case: Directly control the door opening on the video screen.

★

LEDdisplay screen

The alarm system alarm can be displayed on the screen, and after the alarm is processed, it disappears from the screen; Display notifications and current time when idle. When an alarm is triggered, the relay output on the screen can be controlled; After the alarm is processed, the relay on the control screen is turned off.

★

Expand functions and interfaces

Automatic handling of device level events

Can set whether the device records events and automatically processes events.

★

Electronic map point control area

The electronic map supports drawing control areas with any line segment shape, and the line color changes with the point state, and the line thickness can be flexibly adjusted.

★

Advanced map

Support advanced maps such as Baidu Maps, Amap, Google Maps, and support mixing with traditional image file maps.

★

Clock synchronization, computer monitoring

Through computer monitoring, monitor the overall computer operation status of the system and synchronize platform time to all monitored computers.

★

Universal network device detection

Can detect any network device with port services.

★

timer event

Timers can not only be used for planning linkage, but also generate timer events.

★

Plan setting function

After a scheduled alarm occurs, the associated contingency plan will automatically pop up for the convenience of the on duty personnel to handle. The contingency plan supports a mix of text and images. The priority order supported by the contingency plan setting is four levels: event point, event type, trigger type, and system type.

★

Deployment and Demolition Plan

Implemented intelligent detection of delayed deployment and early removal of defenses, resulting in a more efficient management mode. The deployment and dismantling plan supports four priority levels: designated date, monthly, weekly, and daily. It is possible to specify deployment and dismantling plans for alarm users and alarm zones separately. And it can be set separately whether to detect failure to deploy in a timely manner and early withdrawal of defense.

★

External application management

Can manage external applications and locate them on the map. In addition to manual startup, linkage settings can also be set to launch external applications. In addition to launching local applications, it can also launch applications on other seats.

★

reporting system

Summarize the working status of each subsystem and display it in a visual and rich chart format, with scientific, aesthetic, and interactive features. The report will automatically and dynamically update in real-time with changes in subsystem location status and events. The event report will automatically refresh every day.

★

View Point Event Report

On any interface displaying a point, there is a right-click menu called 'Event Report'. Clicking on it will display the event report for that point.

map trajectory

Patrol routes and personnel trajectories can be displayed on the map, and support cross map and bitmap mixed display of trajectories with GIS maps. The personnel trajectory can be replayed and recorded with one click on the map.

★

Manually registering events

Any event can be manually registered at any point, such as emergency events, inspection anomalies, maintenance, manual reporting, and other event management. Generate aesthetically pleasing statistical reports that can be generated by location.

★

Email notification service function

When a scheduled event occurs, an email can be automatically sent to the email addresses of relevant responsible persons, and the email content can be customized and pre-set. Forwarding settings support four levels of settings: event point, event type, trigger type, and system type.

★

SMS/WeChat notification service function

When a scheduled event occurs, SMS/WeChat can be automatically sent to the phones of relevant responsible persons, and the SMS content can be customized and pre-set. In addition to automatic SMS sending, it can also be manually sent and received, with complete SMS record management. Forwarding settings support four levels of settings: event point, event type, trigger type, and system type. Support using serial port for isolation. Supports more than 10 SMS interfaces.

★

Event forwarding personnel management function

Supports up to 11 levels of grouping, with a maximum of 999 subgroups per group. Each personnel can set up three receiving numbers and three receiving email addresses. When setting up forwarding, you can specify groups or individuals, and also support directly filling in the receiving number.

★

Well developed API

Open integration interface, supporting DLL, OPC, and communication protocol methods, making secondary development very flexible. You must log in with the API operator of the platform before you can perform pull and reverse control. API has high security and flexibility. In addition to pushing platform events, it can also receive events from secondary development platforms.

★

Virtual receiver service

Third party applications (such as networked alarm centers) can connect the integrated platform as a receiver to receive events (such as alarms) reported by devices integrated with the integrated platform (such as network modules). And it can directly control the alarm user deployment and disarming in the integrated platform through third-party applications.

★

Data Management and Security

Point import tool

Support importing data points from Excel, greatly reducing the workload of inputting data points during project implementation.

★

Event sound file generation tool

Support customers to generate sound files through TTS, making it convenient for them to manage event sound files without worrying about recording event sounds.

★

Complete event recording function

The platform has a comprehensive event recording system. All kinds of events that occur in the system can be recorded in detail. For example, alarm records, system records, operation records, patrol records, linkage action event records, etc. And these records can be observed in various ways, sorted in various orders, classified and queried.

safety measures

As a professional security integration platform, various security measures are indispensable, and operator level management can fully control the behavior ability of each operator in the system. At the same time, in terms of database security, the system will automatically check the integrity of the data. If the system exits abnormally and restarts, the system will automatically maintain the database. It is also possible to set up automatic backup alarm records, automatic deletion of event records, and other operations to ensure foolproof performance.

Dual database processing mode

The software must include internal databases and support for large databases (such as SQL Server, etc.) to ensure maximum software speed and data security.

★

Data maintenance function

There are comprehensive data maintenance tools that can complete data reconstruction, data backup, data recovery, data repair and other data maintenance functions.

★

View communication data

There is a unified communication data viewing interface, which makes it easy to view communication data during device debugging.

★

Password security encryption

Any passwords related to operators, database passwords, device passwords, and location passwords in the platform have been encrypted and stored using advanced encryption algorithms to prevent password leakage and illegal access from databases and other sources.

★

Communication data security encryption

All internal communications in the platform are encrypted using advanced encryption algorithms to prevent data from being monitored and tampered with. The network file system, digital video matrix, and SMS server even use super secure random passwords.

★

Multilingual and large-scale architecture

Multilingual version

As long as the dictionary file is translated accordingly, it can be localized into any language; Corresponding settings can be made for language attributes, specifying language icons to display languages more intuitively; In the language list, select the language you want to modify to make the corresponding changes. There are specialized and very useful dictionary making tools to create dictionaries.

★

Seat management

You can view online agents and command them to log out of the platform, exit the platform, log out of the computer, shut down the computer, and restart the computer.

★

Automatic seat upgrade

Software upgrade, you can only reinstall the server software, and the agent will automatically update the software.

★

Hierarchical networking capability

The platform realizes the networking of all devices, enabling unrestricted sharing of devices up and down between platforms. Realize one-stop access and access from any location. And provide a secure shared access mechanism. Meet the high demand for multi-level platform integration.

★

usability

Remote encryption lock upgrade

There is no need for customers to send the encryption lock back to the manufacturer in order to upgrade authorization. Authorization can effectively guarantee the lifting of restrictions on the collection of project funds and provide reliable technical means for the normal collection of project payments.

★

Equipment classified by subsystem type

When installing equipment, the equipment is classified by subsystems for easy installation.

★

Complete list of supported devices

Provide a list of all devices supported by the platform, including device names and supported controls.

★

Customize project name

The project name can be changed to the software name, and the platform title and name will display the modified name.

★

Customize the main display

When there are multiple screens, the display screen for the main interface of the platform can be set.

★

Implementation simplicity

It's not just professionals who can install it, use a foolproof installation package. There are no patches that need to be manually copied and installed. Database updates (such as adding new data tables, updating data table structures, etc.) are all carried out by the platform software's own backend, without the need for manual updates by database administrators.

★

Environmental dependence

The platform does not rely on any runtime libraries, and there is no possibility of environment version conflicts.

★

System setup simplicity

All system settings are set up in the software through a settings interface, without the limitation of requiring professional personnel to modify backend parameters.

★

Software operability

The software operation adopts a consistent style/method, which greatly shortens the familiarization time of users and minimizes/eliminates post software technical support/maintenance.

★