-
E-mail
sales@hz-jh.com
-
Phone
13505819720
-
Address
No. 3 Kangle Road, Kangqiao Industrial Park, Gongshu District, Hangzhou City
Product Categories
- Ozone and photoaging test series
- Curing oven, drying oven, drying oven series
- Vibration and Drop Series
- Specialized equipment for the battery industry
- IP Protection Test Series
- Thermostatic bath (pot) series
- Formaldehyde testing chamber/formaldehyde testing laboratory
- Environmental testing equipment for the electric energy meter industry
- Temperature/Humidity Test Series
- Large scale walk-in laboratory series
- Multi functional climate simulation laboratory series
- Environmental testing equipment for photovoltaic industry
Hangzhou Jiuhuan Fuqi Industrial Co., Ltd
Salt Lake Brine Evaporation and Phase Change Climate Simulation Laboratory
NegotiableUpdate on 07/26
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
This climate simulation room conducts experimental research on the natural sun drying, evaporation, cooling, and freezing processes of salt fields, the production and separation processes of various types of brines, the comprehensive utilization of brine resources, and the establishment of precise and efficient control, analysis, and identification methods for salt field production processes through artificial quantitative changes in natural environmental factors. It also provides reliable basis for enhancing the ability of salt field processes to adapt to changes in environmental climate and resist natural disasters.
Product Details
Salt Lake Brine Evaporation and Phase Change Climate Simulation LaboratoryofEquipment system composition:
This experimental system is composed of1A multifunctional climate simulation laboratory with an internal space1The computer center control room consists of two parts and Nogan subsystems; On the basis of ensuring coordinated control among various subsystems, carry out intelligent control.
The main subsystems are:
AAir treatment and circulation system
BAir supply system
CTemperature and humidity compensation and constant temperature and humidity system
DRefrigeration system
EPrecipitation sprinkler system
FSunshine system
GHumidity monitoring system
HDehumidification system
IBrine evaporation system
J. control system
Salt Lake Brine Evaporation and Phase Change Climate Simulation LaboratoryofMain technical parameters:
1．Studio size:4000×6000×2500(Width x Length x Height)Mm (customizable)
2. openDoor size:
3. Anti corrosion treatment of the box: outer wallSUS304Stainless steel, inner wall non-metallic composite plate orSUS316Stainless steel assembly, high and low temperature resistance, corrosion resistance, and high adhesion sealant sealing;
4. Bottom plate load-bearing capacity: 500KG/㎡
5. Bottom anti-corrosion treatment: polypropylene is laid at the bottomPPBoard anti-corrosion
6. Temperature range: -5~60 or
7. Temperature fluctuation:≤±
8. Temperature deviation:±
9. Heating and cooling rate 0
10. Humidity range:20%~98%R·H
11Humidity deviation:≤±3.5％RH
12. Precipitation: 0
13. Direction of artificial rain: vertically downward
14．Raindrop diameter: 0.5～
15. Radiation intensity: 1.12±10% KW·㎡
16. Cooling method of refrigeration system: air-cooled
17. Temperature and humidity control method:PID+Fuzzy control method
18. Light source: Xenon lamp
19. Wind speed: 0
20. Brine evaporation zone:Controlled by the flow meter and evaporator level controller, the electric valve and corrosion-resistant pump operate according to the instructions of the controller.
21. Power Supply:3X380V±10% 50Hzfive-wire system
22. Total installed power: approximately160kw
