SUTE320A Wireless High Voltage Nuclear Phase Analyzer

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The SUTE320A wireless high-voltage phase analyzer, also known as the fully intelligent wireless high-voltage voice phase analyzer or wireless high-voltage phase analyzer, is composed of a wireless receiver, detector, and telescopic insulation rod. The receiver adopts a 3.5-inch true color LCD screen, which displays the nuclear phase result, phase, voltage, frequency, vector diagram indication on the same screen. There are voice prompts such as "X signal normal, Y signal normal, in-phase, out of phase", which are clear and intuitive.

Product Details

SUTE320A Wireless High Voltage Nuclear Phase Analyzer

SUTE320A无线高压核相仪

SUTE320AWireless high and low voltage nuclear phase analyzeralso known asFully intelligent wireless high-voltage voice phase analyzer、Wireless High Voltage Nuclear Phaser, abbreviated asNuclear phase analyzerorNuclear reactor, by wireless receiver、detectorExpansion and contractionComposed of insulating rods, etc. The receiver adopts3.5-inch true color LCD screen, displaying nuclear phase results, phase, voltage, frequency, vector diagram indicators on the same screen, with voice prompts such as "X signal normal, Y signal normal, in-phase, out of phase", clear and intuitive. The nuclear phase distance on open ground can reach160mFar away, it can be right1V～The 550kV voltage line is equipped with fully intelligent core phase. Bare wires of 35kV and below can directly contact the core phase, while bare wires of 35kV and above use non-contact core phase. The non-contact core phase is achieved by gradually approaching the detector to the tested wire. When an electric field signal is induced, the core phase can be completed without directly contacting the high-voltage wire, making it safer! This nuclear phase analyzer has the functions of a high-voltage voltage tester, a high-voltage phase meter, and a high-voltage phase sequence meter, which can be used for electrical testing, phase sequence testing, transformer group determination, etc.

SUTE320A无线高压核相仪

merit can	High and low voltage wireless voice core phase, frequency, phase, phase sequence, and electrical testing
electricity source	receiver: DC 7.4V 3000mAH rechargeable lithium battery Detector: DC 3.7V 1000mAh rechargeable lithium battery USB charging interface, continuous operation for about 10 hours
transmission method	315MHz, 433MHz wireless transmission
Nuclear phase distance	maximum approximately160m
display mode	3.5-inch true color LCD screen display
quantity Cheng	Nuclear phase voltage level:AC1V～550kV
	Phase:0.0°～360.0°
	Voltage:1kV～35kV
	frequency45Hz～75Hz
part distinguish rate	0.1°；0.1Hz; 1V
essence degree(23 ℃± 5 ℃, below 80% RH)	Phase:≤±10°
	Voltage:±15%±5dgt（1kV～35kV， High voltage overhead power linesOther application errors±25%±5dgt）
	frequency≤±2Hz
Differential qualitative analysis	in-phase:－30°～30°； Heterogeneity: 90 °～150 ° and 210 °～270°
Voice feature	In phase, out of phaseVoice functions such as normal X signal and normal Y signal
Insulation rod size	Stretching for approximately3.2m; approximately 0.6m in length after contraction
data storage	9999 sets
Nuclear phase method	Contact nuclear phase:Bare conductors below 35kV, or those with safety insulation sheaths below 110kVDirect contact of wiresNuclear phase.(with insulated rod operation)
	Non contact nuclear phase:Bare conductors above 35kV, or above 110kVThe line adopts non-contact technologyNuclear phase, gradually approaching the wire.(with insulated rod operation)
	Auxiliary grounding wire measurement: belowAt 100V, if the measurement result is unstable, an auxiliary grounding wire needs to be connected to the grounding point to enhance the signal
Electrical verification indication	detectorBeep beep beep beep beep beep "sound
change 档	automatic gear shifting
sampling rate	2 times per second
Instrument size	Detector: Length, Width, Thickness145mm×60mm×50mm
Instrument size	Receiver: Length, Width, Thickness207mm×101mm×45mm
backlight control	pressup and down arrowsAdjust backlight brightness with the key
Induction intensity control	According to the different strength of the induced electric field, the detector can automatically control the amplification factor, which is convenient for phase detection in densely populated areas
data retention	Press in test modeHOLDPress the key to hold the data, then press againHOLDKey Cancel Keep
Exit function	pressESCPress the key to exit the current function interface and return to the higher-level directory
data lookup	pressENTERAfter entering data search mode, pressarrowKey to browse the stored data
No signal indication	Dynamic display when the receiver does not receive the transmission signal-- "symbol
Auto Shutdown	Start up approximatelyAfter 15 minutes, the instrument panel will automatically shut down to reduce battery consumption
battery voltage	When the battery is low: Detector: The power indicator light flashes slowly to remind charging; Receiver: Low battery voltage symbol display, reminding to charge
rated current	Detector:20mA max； Receiver: 200mA max
Instrument quality	Detector:342g (including battery)
	receiver:450g (including battery)
	Insulation rod:0.5 kg (1 piece)
	Total mass:5.61kg (including instrument box)
Operating temperature and humidity	-10℃～40℃； Below 80% Rh
Storage temperature and humidity	-10℃～60℃； Below 70% Rh
dry disturb	No particularly strong electromagnetic field; Nothing433MHz, 315MHz co frequency interference
insulation strength	Insulation rod:AC 110kV/rms (between both ends after the insulation rod is fully stretched)
	Detector:2000V/rms (between the two ends of the casing)
	receiver:2000V/rms (between the two ends of the casing)
Suitable for safety regulations	GB13398-92, GB311.1-311.6-8, 3DL408-91 standards and the newly issued national power industry standard "1kV for live working～General Technical Requirements for 35kV Portable Nuclear Phasers DL/T971-2005
Suitable for safety regulations	comply withIEC61481－A2:2004； IEC 61243-1 ed.2:2003 standard

SUTE320A Wireless High Voltage Nuclear Phase Analyzer

SUTE320A无线高压核相仪