Welcome Customer !

Membership

Help

Shenzhen SoSheng Technology Co., Ltd
Custom manufacturer

Main Products:

instrumentb2b>Products

Shenzhen SoSheng Technology Co., Ltd

  • E-mail

    Danny@szsocen.com

  • Phone

    18688976808

  • Address

    5021, Block B, Hedong Building, Liutang Road, Xixiang, Bao'an District, Shenzhen

Contact Now

SUBSITE 910R Pipeline Detector from the United States

NegotiableUpdate on 04/05
Model
Nature of the Manufacturer
Producers
Product Category
Place of Origin
Overview
Shenzhen SoSheng Technology Co., Ltd. acts as an agent for the American SUBSITE 910R pipeline detector. It can easily detect any buried pipeline, including telecommunications cables, power cables CATV、 Gas pipelines and water supply and drainage pipelines are an efficient and low-cost pipeline instrument. It has the characteristics of simplicity, light weight, multifunctional antenna, flexible operation, and an easy to read backlit screen, with a detection depth of up to 4.6 meters. Whether you use active or passive sources, they can help you detect in various complex environments with ease.
Product Details


Shenzhen SoSheng Technology Co., Ltd. acts as an agent for the American SUBSITE 910R pipeline detector. The SUBSITE underground pipeline detector can easily detect any buried pipeline, including telecommunications cables, power cables CATV、 The SUBSITE 910R pipeline detector is an efficient and low-cost pipeline detector for gas pipelines and water supply and drainage pipelines in the United States. It has the characteristics of simplicity, light weight, multifunctional antenna, flexible operation, and an easy to read backlit screen, with a detection depth of up to 4.6 meters. Whether you use active or passive sources, they can help you detect in various complex environments with ease. The main best-selling models are 950RT, 970T, 300SR, 300ST, and 910R.

Product Introduction

SUBSITE 910RPipeline detector

More choices mean better results. When you detect underground pipelines, cables, or search for non-metallic pipelines through beacons,910RThe receiver allows you to configure instrument functions and install suitable frequencies according to local application conditions, and it has internal features such as950RA high-performance structural platform with the same receiver, pre-set with 4 standard frequencies (see list on the back page), and additional configured frequencies only require a small additional fee.910RCan use active mode to receive950Tperhaps970TThe emitted signal can also scan underground shielded cables in passive mode, and can locate the positions of various power cables, cable TV cables, and oil or gas pipelines carrying cathodic protection frequencies.910RAccording to your requirements, you can freely choose to carry various frequencies to achieve satisfactory results of maximizing the beauty of the object and tracing its origins.

910R Specification of pipeline detector

size the metric system

length 325mm

height 705mm

operating weight 2kg

operate

Operating temperature range -20to50

Antenna settings single peak,Double Peaks,No peak,the left side/the right side

volume output buzzer

Look In

cable 4.8m

beacon(Metal Tube)3m

beacon(Plastic pipe)4.8m

*Large depth range

Passive search 0.15-3m

Beacon search 0.15-4.8m

Search method

Double Peaks Direct reading (without interference)70%The law,25%law

single peak50%law

Range of depth value error

active mode cable±3% 0.06-1.5m

active mode cable±5% 1.5-3m

active mode cable±10%3mthe above

Passive mode cable±10% 1.5-3m

beacon±5% 1.5-3m

±10% 3.0-4.8m

LCDBackground lightLED(green)

External InterfaceRS-232

Waterproof gradeIP65

battery

model 6joint2Alkaline battery

service life 50About hours(exist21Continuous use under conditions)

Power saving mode The instrument is not in operation5Automatically close in minutes

Note: The depth error of the receiver has been calibrated in the standard calibration field, and the actual measured depth may be affected by environmental interference, resulting in less than the standard error.

Suggested configuration frequency:50Hz50P100Hz150Hz(or29KHz

910R Frequency optional

active mode

512Hz1KHz8KHz29KHz80KHz200KHz

Passive mode-Power Cable

50Hz50PHz60Hz60PHz100Hz120Hz150Hz180Hz

beacon mode

512Hz29KHz33KHz

LMS(Cable marking signal)

400Hz560Hz815Hz

other

31KHz CATVpassive

33KHz EML

radio Passive (no depth value)