SOF010

NegotiableUpdate on 05/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Advantages and features: Taiwan TBI flange type ball spline SOF010, spline diameter 10mm, symmetrical installation hole distance of 28mm, with hollow spline shaft and solid spline shaft available

Product Details

Advantages and Characteristics:Taiwan TBI flange type ball spline SOF010, with a spline diameter of 10mm and a symmetrical installation hole distance of 28mm for the spline female. There are hollow spline shafts and solid spline shafts available. TBI ball spline shaft spline function is a high-speed, low support rotating body, so its dynamic balance is crucial. Generally, the transmission shaft needs to undergo a dynamic balancing test before leaving the factory and be adjusted on the balancing machine.

Sectional shape of SOF and SOT spline shafts

SOF series size chart

model	Z-axis diameter	Ball bearing array	Spline bearing sleeve
	d		D	L	A	B	E	H	W	Mounting Hole
										X
SOF010	10	2	19	30	36	4.1	5.9	28	28	4.5

model	Basic Load Rating		Basic rated torque		Allowable static moment		quality
	C	Co	CT	CoT	MA1	MA2	Spline outer cylinder	Spline shaft
	kgf	kgf	kgf.m	kgf.m	kgf.m	kgf.m	g	kg/m
SOF010	192	219	1.11	1.27	0.71	4.23	45	0.61

The tooth profile dimensions of TBI ball spline shaft SOF010 are specified in two series in the standard according to the different tooth heights, namely the light series and the medium series. The load-bearing capacity of the light series is relatively low, and it is mostly used for static or light load connections; The medium series is used for medium loads.

The centering method for rectangular splines is small diameter centering, where the small diameter of the external and internal splines serves as the mating surface. Its characteristics are high centering accuracy, good centering stability, and the ability to eliminate deformation caused by heat treatment through grinding. Rectangular spline connection is the most widely used spline connection. Widely used. Such as aviation engines, automobiles, gas turbines, machine tools, construction machinery, tractors, agricultural machinery, and general mechanical transmission devices, etc.

The tooth profile of the involute TBI spline shaft SOF010 is involute, and there are two types of pitch circle pressure angles α: 30 ° and 45 °. The tooth crest heights are 0.5m and 0.4m respectively (m is the modulus). The involute spline can be processed using the method of manufacturing gears, which has good processability and is easy to achieve high manufacturing accuracy and interchangeability.

The centering method of the involute TBI spline shaft is tooth profile centering. When loaded, there is a radial force on the teeth, which can automatically center the teeth and promote uniform force distribution, high strength, and long service life. Used for connections with large loads, high centering accuracy requirements, and large dimensions, such as aviation engines, gas turbines, automobiles, etc. Splines with a pressure angle of 45 ° are commonly used for connecting light loads, small diameters, and thin parts.

Taiwan TBI flange type ball spline SOF010, with a spline diameter of 10mm and a symmetrical installation hole distance of 28mm, can be divided into hollow spline shaft and solid spline shaft. TBI ball spline shaft spline function is a high-speed, low support rotating body, so its dynamic balance is crucial. Generally, the transmission shaft needs to undergo a dynamic balancing test before leaving the factory and be adjusted on the balancing machine.