SNL stainless steel leveling machine 0.1-2.0

New precision stainless steel leveling machineSpecially designed for correcting thinner materials such as stainless steel, copper, iron, aluminum, etc., it can achieve perfect straightening effect.In addition to the upper and lower leveling rollers, an auxiliary leveling wheel is also installed internally to prevent the leveling roller from bending and deforming due to excessive pressure, enhance the leveling strength and service life of the leveling roller, and improve the surface flatness of the board.

SNLPrecision correction machineFeatures:(0.1~2.0mm thick)

It is impossible to produce good punched parts without flattening and stress relief of the coil material. Only by flattening the coil material can stress relief be achieved;

After being leveled by this machine, the material can be corrected to bend or flatten upwards or downwards;

The Peilin on both sides of the roller shaft adopts an oil-free and lubrication free design, which is wear-resistant and will not cause problems such as oil stains or dirt adhesion;

The transmission device is controlled by a frequency converter (loop control), which can synchronize and smoothly feed the material with the speed of the punch press;

SNL stainless steel precision leveling machine, note: suitable for 0.1~2.0Roll diameter: 36, as follows: