-
E-mail
76806818@qq.com
-
Phone
15068837752/15168257898
-
Address
587 Haitang Road, Economic Development Zone (Xinjie Town), Xiaoshan District, Hangzhou
Product Categories
Hangzhou Jiayou Industrial Co., Ltd
SMT workshop specific humidifier
NegotiableUpdate on 07/13
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
1. The crab shaped nozzle collision structure achieves three-stage gasification, resulting in finer atomization than ordinary two fluid humidifiers; 2. The humidifier in the SMT workshop adopts plastic material nozzles, which are non clogging and durable for a long time; 3. Low gas consumption, one-third of similar products; 4. The pot body is made of PP material imported from the United States/South Korea, which is physically antibacterial, has a smooth surface, and does not deform under low and high temperature conditions; 5. Optional temperature and humidity automatic control sensors can be installed to achieve automatic humidification and cooling based on the actual temperature and humidity of the air; 6. The installation is fast and convenient. As long as the air compressor is connected, the spray can work easily; 7. The single-sided mist distance of the humidifier nozzle in the SMT workshop can reach 3-4 meters, achieving an ideal humidification area of 30-60 square meters.
Product Details
The special humidifier for JY-WWQS8 smt workshop is a high-performance new type of aerosol humidification, electrostatic removal and cooling spray device developed and produced by Hangzhou Jiayou Industrial Co., Ltd.
The humidifier in SMT workshop has controllable pressure setting and controllable coverage range
The humidifier in the SMT workshop has no dripping, condensation, or white powder phenomenon, and is a gas mist hybrid power with a two-stage atomization system;
High quality spray particles to avoid wetlands;
Air path delay design effectively prevents nozzle blockage;
Optional temperature and humidity automatic control sensors can be installed to achieve automatic humidification and cooling based on the actual temperature and humidity of the air;
The installation is fast and convenient. As long as the air compressor is connected, the spray can work easily;
The humidifier in smt workshop is maintenance free, with a long service life, and can always maintain a good spray state.
|
Textile and Chemical Fiber |
◆◆◆ |
|
|
|
|
●Increase the strength of fibers, yarns, and fabrics ●Eliminate static electricity, improve hand feel, and enhance quality ●Reduce breakage rate and improve equipment operation speed ●Reduce waste and improve economic efficiency |
||||
|
Electronic workshop |
◆◆◆ |
|
|
|
|
●Eliminate static electricity and improve product quality ●Prevent computer components from being damaged when the air is dry ●Reduce air dust content ●Has the functions of air purification, humidification, and dust reduction |
||||
|
Printing Workshop |
◆◆◆ |
|
|
|
|
●Eliminate static electricity ●Avoid paper wrinkling ●Prevent paper from stretching and deforming ●Reduce dust and improve printing quality |
||||
|
Clean workshop |
◆◆◆ |
|
|
|
|
●Increase air humidity ●Reduce floating dust in the air ●Eliminate the generation of static electricity |
||||
|
Workshop humidification |
◆◆◆ |
|
|
|
|
●Increase air humidity ●Reduce floating dust in the air ●Eliminate the generation of static electricity |
||||
Crab shaped nozzle for fine atomization
The humidifier in the SMT workshop adopts a crab shaped nozzle collision structure design, achieving three-stage gasification and finer atomization than ordinary two fluid humidifiers; 33000-40000 Hz ultrasonic multiple atomization shear water particles with a particle size of 5-7.5 microns, ensuring that the ground and equipment surfaces in the humidification area are not wet, dew, or damp
Pot body material
Using PP material imported from the United States/South Korea, it has physical antibacterial properties, smooth surface, and does not deform under low and high temperature conditions. It can withstand temperatures of -40 ° C to 270 ° C without deformation, and is resistant to pressure, corrosion, acid and alkali
pressure gauge
Controllable pressure setting: A single JY-QS8 air-water humidifier can achieve an ideal humidification area of 30-60 square meters with a nozzle single-sided mist distance of 3-4 meters at a pressure of 3 bar
Equipped with temperature and humidity sensors
Automatic temperature and humidity control system: error control within ± 3%, always maintaining suitable indoor temperature and humidity
|
Industrial humidifiers have evolved from early water spraying, to later air conditioning humidification, and now to industrial humidifier humidification. Hangzhou Jiayou Industrial Co., Ltd. launched a new JY-WWHJQS8 dry fog humidifier/air-water mixed spray humidifier according to the current requirements of industrial production humidification. JY-WHJQS8smt workshop humidifier, originally named dry mist humidifier/air-water humidifier, has become a popular new humidification equipment due to its dry mist non wetting characteristics, energy-saving performance, high cost-effectiveness, and easy maintenance. It adopts the principle of siphon atomization system. The separated compressed gas and liquid converge at the special stainless steel nozzle to achieve two-stage atomization and obtain good spray effect. The diameter of spray particles is 5-10um. |
 |
| water pressure （bar） |
air pressure （bar） |
discharge （L/h） |
Gas consumption （L/min） |
Unilateral spray distance （mm） |
Shao Te average value （um） |
Droplet reaching area （m²） |
| 0 | 3 | 10 | 116 | 5800 | 5.5 | 120 |
| 0 | 2 | 8 | 110 | 4500 | 7.5 | 80 |
| 0 | 1 | 6 | 90 | 3800 | 10 | 60 |
specifications
| material | main housing | polypropylene | Corrosion resistant and durable |
| spray nozzle | plastics | Corrosion resistant and durable | |
| retainer | silicone rubber | ─ | |
| weight | Single nozzle | 220g | ─ |
| 4 nozzles | 350g | ─ | |
| Connection method | Gas path | Rc1/4 | Diameter Φ 10mm |
| waterway | Rc1/8 | Diameter Φ 8mm |
Similar Product Recommend
