SHD-I cable pulley/I-beam towing pulley

SHD-I cable pulley/I-beam towing pulleyIt is divided into medium load type, heavy load type, and light load type. Therefore, the pulleys of the pulley are three types: Ø 80, Ø 63, and Ø 50, with a bearing capacity of ≤ 50-150kg. Each type is divided into single-layer, double-layer, and three-layer according to the number of pallet layers, and there are three forms in each type. The first end is a cable traction vehicle, the terminal is a fixed hanging rack, and the middle is a cable pulley (see the figure below)

The pulley consists of three parts: the traction pulley, the cable pulley, and the terminal pulley. The traction pulley follows the mobile mechanical cable (traction) device, and each mobile machinery is equipped with one, which runs back and forth with the mobile machinery. The middle cable pulley suspends the cable within the range of the I-beam track and moves with the traction pulley. Both ends are equipped with buffer impact heads, and the number of pulleys depends on the length of movement. The terminal pulley is fixed at the end of the I-beam guide rail, usually one for each mobile machine.

productionSHD-I cable pulley/I-beam towing pulleyThere are five models available: I, II, III, IV, and V. If the user uses I-beams of size 12, 14, or larger, they can be specified when placing an order, and our factory can provide complete sets of supply.