- Phone
-
Address
Room 613, No. 5 Fengti North Road, Fengtai District, Beijing
Product Categories
Dejing Technology (Beijing) Co., Ltd
SDK2400 nitrogen blowing instrument
NegotiableUpdate on 05/06
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The nitrogen blower (sample concentrator) is widely used in laboratories of medical institutions, universities, scientific research departments, as well as chemical, pharmaceutical, petroleum, electronics and other units. The SDK2400 nitrogen blowing instrument integrates the functions of constant temperature water bath and sample concentration, and has the characteristics of time-saving, easy operation, and easy control. It is one of the commonly used instruments for sample pretreatment in the laboratory.
Product Details
1、 Instrument Introduction
The nitrogen blower (sample concentrator) is widely used in laboratories of medical institutions, universities, scientific research departments, as well as chemical, pharmaceutical, petroleum, electronics and other units.SDK2400 nitrogen blowing instrumentIt integrates the functions of constant temperature water bath and sample concentration, and has the characteristics of time-saving, easy operation, and easy control. It is one of the commonly used instruments for sample pretreatment in the laboratory.
IISDK2400 nitrogen blowing instrumentPerformance characteristics
1. Applicable test tube specifications: diameter 15mm~30mm.
2. Sample size: 24 digits, can use different specifications of test tubes simultaneously.
3. Gas circuit board: with sample number, equipped with automatic lifting function, independent needle valve to control the flow rate and switch of various grades of gas.
4. Water bath: Square stainless steel constant temperature water bath with observation window, convenient for samples and brackets to enter and exit the water bath, with anti dry burning function.
5. Air needle: The total length of the connecting piece and nozzle is 100mm, and the nozzle can be replaced to prevent cross contamination.
6 Surface components: resistant to organic solvents
7. Portability: When concentrating toxic samples, the entire system can be placed in a fume hood.
8. Gas path: Integrated molding structure, no need to connect lengthy rubber hoses.
9. Air source: It can be connected to external nitrogen or use the built-in air source (optional).
3、 Performance parameters
Temperature range: Room temperature+5 ° C~99 ° C (LCD display)
Temperature control accuracy: ± 1 ° C
Test tube size: diameter 15mm~30mm
Gas flow rate: 0~15L/Min, built-in nitrogen flow valve
Gas consumption: 330ml/min/sample (adjustable)
Heating method: Constant temperature water bath
Inner container size: length 370mm x width 145mm x height 140mm
Appearance dimensions: length 500mm x width 400mm x height 500mm
4、 Specification parameters
serial number |
project |
parameter |
1 |
model |
SDK2400 nitrogen blower (type sample concentrator) |
2 |
power supply |
AC 220V/50Hz |
3 |
Maximum power (W) |
1000 W |
4 |
Temperature control range |
Room temperature+5 ℃ -99 ℃ |
5 |
temperature fluctuation |
≤ 0.5℃ |
6 |
Range of indication error |
≤ 0.5℃ |
7 |
Exhaust volume (L) |
Single hole maximum 4.16 L |
8 |
Dimensions (mm) |
Length 500mm x Width 400mm x Height 500mm |
9 |
total weight |
15kg |
