Rubber and product quality, volume change rate, density tester RU-300K/600K

NegotiableUpdate on 04/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Suitable for: research laboratories for vulcanized rubber, compression seals, oil rings, O-rings, D-rings, V-rings, compression seals, and oil seals. Principle: Soak the vulcanized rubber sheet in liquid such as fuel oil, alcohol fuel additives, lubricants, etc. according to JIS-K-6258 and ISO1817. And check the changes in mass, volume, surface area, extract, hardness, and mechanical properties before and after the test piece. Technical data: Quality change rate: The change in weight of vulcanized rubber sheets in air before impregnation and after impregnation. Volume change rate: the change in volume of vulcanized rubber sheet before impregnation and after impregnation. Function: No need for tedious calculations, directly read the mass change rate and volume change rate of vulcanized rubber and oil seals. Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line. When using corrosive liquids as media, an anti-corrosion water tank can be purchased as an option. Specification: Model

Product Details

Applicable to:
Vulcanized rubber, compression oil seal, oil ring, O-ring, D-ring, V-ring, compression, oil seal research laboratory.
Principle:
According to JIS-K-6258 and ISO1817, immerse the vulcanized rubber sheet in liquids such as fuel oil, alcohol fuel additives, lubricants, etc. And check the changes in mass, volume, surface area, extract, hardness, and mechanical properties before and after the test piece.
Technical data:

Quality change rate: the change in weight of vulcanized rubber sheets in air before impregnation and after impregnation.
Volume change rate: the change in volume of vulcanized rubber sheet before impregnation and after impregnation.

Function:

No need for tedious calculations, directly read the mass change rate and volume change rate of vulcanized rubber and oil seals.
Adopting a large water tank design to reduce the error caused by the buoyancy of the suspension line.
When using corrosive liquids as media, an anti-corrosion water tank can be purchased as an option.

Specifications:

model	RU-300K	RU-600K
Weight range	0.01~300g	0.01~600g
direct read	Quality change rate, volume change rate, visual density
Test category	EPS、PUR、PE、PF、UF
Test time	About 5 seconds
Range	Materials with a density greater than or less than 1 can be tested
precision	Volume: 0.01cm3 Index: 0.1% Specific gravity: 0.001g/cm3

Standard accessories:Anti floating frame

Choose accessories:
A： Corrosion resistant sink B: printer