Rough scan roughness meter

NegotiableUpdate on 06/19

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Product detailed introduction, detailed parameters, simple explanation: Features: ● Innovative design, compact structure, economical and durable

Product Details

Product Details
detailed parameters

Simple description: Features: ● Innovative design, compact structure, economical and durable. It can be used to detect the roughness of surfaces of different shapes, including flat surfaces, outer circles, inner holes, grooves, and other difficult to measure surfaces. It can be used both in the workshop and in the metrology room and laboratory. The sensor can be built-in or rotated to 90 °, 180 °, and 270 ° for measurement, easily meeting the detection requirements under different conditions. The instrument can be operated in a vertical or even inverted state. ● Parameters: Ra: arithmetic mean of contour Ry/Rmax: maximum peak valley value of contour Rz: average of 5 maximum peak valley values ● Compliant with ISO, DIN, ANSI, JIS standards ● Top mounted LCD digital display, easy to read The measurement results can be selected in metric/imperial units Standard RS-232 output port can be configured to output measurement results to a micro printer or computer

Measurement range:	Ra：0.05μm ~ 9.99μm /2μ" ~ 400μ" Rz ，Ry/Rmax：0.2μm ~99.0μm/8μ" ~999μ"
display resolution	0.01μm /1μ"
Sampling length (λ C)	0.25 mm, 0.8mm, 2.5 mm optional
Measure travel and evaluate length	1/3/5 times the sampling length
System indication error：	±10%
Repeatability of indication values	≤6%
sensor type	High-precision piezoelectric crystal
Needle tip radius	10 μ m, 5 μ m optional
monitor	3-digit LCD display
power supply	9V high-performance alkaline battery
Battery capacity	About 3000 measurements
standard	Compatible with ISO, JIS, ANSI, DIN standards
Instrument dimensions	145mm85mm33mm

Standard configuration:

◇ Drive operation display (host) ◇ F-type standard sensor

◇ Standard template ◇ Calibration pad

◇ Screwdriver ◇ Instruction Manual

◇ Suitcase ◇ Alkaline 9V Battery

Select accessories

●sensor- Used for measuring the roughness of different workpiece surfaces

1．Standard Sensor (SFP-2001 or SFP-2002)）

Most surface roughness measurements use SFP-2001, an international standard conical diamond contact pin with R=. 0004 "/10 μ m; SFP-2002, R=. 0002"/5 μ m. It is used to detect flat surfaces, outer circles, inner holes with a diameter of not less than 80, and crankshafts.

2．Internal hole (small hole) sensor-----Measure the roughness of the inner hole surface,

The minimum inner hole diameter is 6mm, the deepest length is 15.0mm, and when the hole diameter is greater than 10mm, the deepest length is 55mm

3．Groove sensor------Measure the roughness of the bottom of the groove or blind hole, with a maximum depth of 8mm.

●Small column workbench

---The use of small columns in combination can make measurement more convenient and stable, especially suitable for detecting surfaces such as inner holes and grooves that are difficult to measure.

●Data output (pre ordered at the time of ordering)

The instrument can be optionally equipped with an RS232 interface to output measurement results

Receive and save data to a dedicated printer or through a computer's super terminal.

●Large column workbench

450mm * 250mm * 70mm granite flat plate, 300mm adjustable column, instrument mounting plate that can rotate 90 degrees, can conveniently and reliably detect the roughness of complex shaped surfaces such as outer circles, inner holes, grooves, and inclined surfaces. Cross shaped and inclined working blocks can also be configured for convenient placement and inspection of small parts.