Rotorless vulcanizing apparatus

No rotorVulcanizing apparatusWhen conducting testing, place the rubber sample in a sealed and compressed container, and apply strain to the sample by oscillating the lower mold with a sine wave; Connect a sensor that reflects torque to the upper mold to measure torque. Our company produces HS-M-3000UIt is precisely by adopting the above mechanism design that the eccentric wheel is driven by a DC brushless motor, which drives the lower mold to oscillate at a fixed frequency and angle. The upper mold is connected with a torque element to measure the torque during the motor oscillation process. The amplifier developed by Guangdong Hongsheng Testing Instrument Co., Ltd. collects and processes the raw data, correctly decomposes the full torque, and obtains characteristic parameters such as rubber viscosity, elasticity, and viscoelasticity ratio.

No rotorVulcanizing apparatusThis machine is controlled by specialized vulcanization software developed by Guangdong Hongsheng Testing Instrument Co., Ltd. It is used to analyze and measure performance indicators such as scorch time, positive vulcanization time, vulcanization rate, viscoelasticity, and vulcanization plateau during the rubber vulcanization process. It is one of the key testing instruments used in the rubber industry for developing new products, researching rubber compound formulas, and inspecting product quality.Product specifications: GB/T 16584-1996TheISO 6502-3-2018TheASTM D5289-2017

Mold cavity type Open Model

Experimental modeMDR

Temperature control method Exclusive intelligent digital temperature controller

temperature range At room temperature~200℃

Temperature display resolution 0.1℃

Temperature control accuracy ±0.1℃

temperature deviation ≤±0.3℃

Test temperature recovery time ≤45 second

Test temperature rise time Heating at room temperature~190℃ time less than6minute

Torque range200 dN-m

Torque display resolution0.001 dN-m

Selection of Torque UnitsdN-mThekgf-cmThelbf-in

Experimental oscillation angle ±0.5°, ±1.0°, ±2.0°, ±3.0°

Test frequency1.67Hz±0.01Hz

controller control system

contact methodRJ45

motor DC brushless motor

Experimental pressure source3.5kg/c㎡(0.35MPa)(The pressure source needs to be provided by the customer)

volume(W×D×H) 70×85×130 cm

power supply 1∮AC 220V 50/60Hz 2kW(According to country or customer requirements)）

If there are any changes or variations to the product specifications and content, please refer to the actual quotation information provided by our company.