Product Categories

Qinzhuo High and Low Temperature Test Chamber Special Session

E-mail
Phone
Address
No. 10, 1st Road, Sanjiang Industrial Zone, Hengli Town, Dongguan City, Guangdong Province

Contact Now

Robot arm matching high and low temperature humid heat test chamber

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The robotic arm is equipped with a high and low temperature humid and hot test chamber, which is suitable for testing various performance indicators of aerospace products, information electronic instruments and meters, materials, electrical and electronic products, and various electronic components in high and low temperature humid and hot environments. Automated design provides convenient experimental environment conditions for automated production.

Product Details

High and low temperature damp heat test chamberFeatures:

Suitable for the inspection of various performance indicators of aerospace products, information electronic instruments and meters, materials, electrical and electronic products, and various electronic components in high and low temperature humid and hot environments. The experimental data can be obtained throughUCopy the disk and open the test curve directly on the computer without installing any softwareExcelfile. Thoroughly designed structure:Water and electricity separation design, temperature uniformity. Stratospheric design, ±1.0℃, prevent dripping from the top of the test. Alarm history display and troubleshooting methods.

specific parameters

model

LK-408G

H:0℃~+150℃C:-20℃~+150℃L:-40℃~+150℃U:-60℃~+150℃J:-70℃~+150℃

Test roomsizeWxDxHcm

80*60*85

Overall dimensions WxDxHcm

105*153*176

Temperature range

-40℃~+150℃

Humidity range

20%-98%RH

Analysis accuracy

temperature: 0.01℃:humidity: 0.1%RH

Temperature and humidity deviation

temperature:±1.0℃;humidity:±2.5%RH

warm-up time

+20℃~150Approximately ℃30 min

Cooling time

+20℃~-20C℃≤30min

+20℃~-40℃≤55min

+20℃~-70C≤75min

material

outer box:Rust proof treatment cold-rolled steel plate baked paint inner box: SUS≠304orSUS≠316stainless steel plate

insulating material

Rigid polyurethane foam(With flame retardant)

Cooling method

Imported Taikang Compressor+Fin type all copper evaporator+Air-cooled condenser

refrigerant

DuPont, USAHFCSeries of environmentally friendly refrigerants: R404ATheR23

Compressor cooling capacity

3.0F

3.0P

4.0P

controller

ImportTEMIseries7'Touch sensitive temperature and humidity meter

electrical components

Industrial control products of Schneider, electrical components of Gaylor, Taiwan, China Yangming, etc

Heating and humidification

Nickel chromium alloy heating tubeSUS316Sheath type humidifying tube

circulating fan

Long axis motor+Stainless steel wind turbine

Fault Alarm

Compressor overcurrent, overpressure, overheating, water shortage, heater without air burning, humidifier without water dry burning, leakage protection, over temperature protection, under phase, indoor over temperature

water quality

Purified water or deionized water

power supply

380V AC3Φ4W 50/60Hz

Maximum current（A）

AC380V

12A

18.5A

Other accessories

sample holder2Block, lead hole silicone plug1One, tempered defogging glass1block