Resistance rotation level controller

NegotiableUpdate on 05/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The rotary blocking level controller $r $n Tiankang TKUZK series rotary blocking level controller is a level control instrument used to detect material overflow or empty material shortage in the silo. It can also be used to detect operational failures caused by material blockage in pipelines, thereby avoiding equipment damage and material waste. Widely used in industrial fields such as chemical, food, casting, metallurgy, mining, plastics, electricity, ceramics, etc.

Product Details

Resistance rotation level controller

characteristic

No calibration required, maintenance free.

Multiple rotor options are available to adapt to medium measurement under various working conditions.

•The motor control mechanism ensures that the motor will not be damaged due to jamming.

Oil seals can prevent0.5umThe entry of dust particles can ensure the long-term normal use of the controller. The impact resistant protection mechanism of * ensures that the motor structure is not damaged by material impact transmission.

Measuring principle

The detection device of the resistance rotary level controller consists of a low-speed synchronous motor, rotor, overload detection mechanism, and micro opening Close the composition, synchronous motor at a rate of per minute1.2The speed of rotation keeps spinning. When the rotating rotor touches the material, the rotor's The rotation is obstructed (with adjustable damping), causing the overload detection mechanism to rotate in the opposite direction. When it reaches the set position, it drives a A micro switch sends an alarm signal and cuts off the motor power to control the motor to stop moving. When the material leaves the rotor When the overload detection mechanism returns to its normal position, the motor power is turned on, the rotor continues to rotate, and the microswitch returns to its normal position Initial state.

Due to the use of a special structural design, the motor can avoid faults during long-term operation, ensuring stable and reliable operation The reliability has greatly improved. The anti rotation level controller is widely used in the field of industrial automation to manipulate conveyor belts, elevators Start and stop of mechanical equipment such as feeding machines.

Controller parameters

Electrical parameters

working voltage	24VDC±15%or110/220VAC（±10%） ,50/60Hz
Motor power	4W
Motor speed	Brushless synchronous motor,1.2rpm
controlled output	DPDT 5A/125VAC; 3A/250VAC(normally open or normally closed alarm) resistive load
ambient temperature	-20°C~+70°C（普通型）；-20°C~+60°C(Explosion proof type)
medium temperature	-40°C~+80°C（普通型）；M80°C~^800°C(High temperature type)
work pressure	common application0.2MPa(Pressure higher than)0.6MPaPlease consult the manufacturer)
sensitivity	Adjustable range, maximum sensitivity up to0.2g/cm³

physical parameters

Shell material	polyester/Epoxy resin coated cast aluminum shell
protection level	dustproof/Splash proof（DIPDTT13/IP65）
Explosion-proof rating	ExdHCT3~CT6Gb
Drive shaft components	The precision machined spindle is supported in two ball bearings with dust rings
axis seal	Oil seal in205°Cand0.2 M PaDown, can you stop it0.5u mParticles enter
Install flange	defaultGB20592 DN80 Pn6Thin flange (customized for other specifications)
electrical interface	M20x1.5or 1/2'NPT（G1/2'）
Rigid shaft and rotor	304Stainless steel, using pin connection method
Flexible shaft	neoprene（117°C）Or silicone rubber（204°C）

Selection Table

TKUZK-	01								Side installation (horizontal installation)
type =	02								Top mounted (vertical installation)
	03								Top mounted (tubular)
	04								Top mounted (swinging)
	rule grid	A							220VAC 50Hz
		B							110VAC 50Hz
		C							24VDC
		power supply voltage	0						普通型
			B						Dust explosion-proof type
			watch shell wait level	0					room temperature（-40Seven?ton0
				G1					high temperature 1
				G2					high temperature 2 (>2OOtJ-^4OOt3)
				G3					high temperature 3 (>400tJ^600t)
				G4					high temperature 4 (>600tJ-^S00t3)
				between quality warm degree	L				Threaded installation: Default1T/4NPTthreaded interfaceOthers need to be customized and larger than3/4NPT（Including)
					F				Flange installation: default chemicalDM50namely1Flanges (Other) Customization required)
					safe pretend square formula	A			CSickle shaped rotor
						B			Square blade rotor
						C			Rectangular blade rotor
						D			Xuan chain propeller rotor
						E			Zhe Gu type rotor
						F			Shovel rotor
						Z			Other customized rotors
						Rotor type	H		two100? Deduction00Po (optional)
							guarantee protect pipe long degree	L	=2OO-25OOjmRecognizing from the cricketJStarting to calculate the construction surfaceThe kettle Xie layer crane flood divinationinm,
								insert A deep degree
TKUZK-	□	□	□	□	□	□	□	□
Note 2: Special measurements can be customized,

Resistance rotation level controller

Explosion proof instruments are strictly prohibited from opening the cover when powered on!

Sensitivity (needs to be adjusted with appropriate rotors)

The spring position can be adjusted, and the spring position can be adjusted in seven gears (refer to the above figure)2、4、6The sensitivity of the hole increases in sequence 1：Spring placement2The hole position should be used for materials with high specific gravity; low sensitivity.

2:Spring placement4The hole position should be used for materials with high specific gravity; Medium sensitivity.

3:Spring placement6The hole position should be used for materials with lower specific gravity; high sensitivity.

throughPliers or other clamping tools can be adjusted.