Resistance meter RM3544

NegotiableUpdate on 03/24

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

● Basic accuracy of 0.02%, minimum resolution of 1, maximum test current of 300mA ● Measurable range of 0.000m (test current of 300mA)~3.5M ● Anti interference measurement is achieved by protecting the probe used at the port and increasing the test current ● Comparison judgment lamp (optional) and high volume judgment sound can be used to accurately judge whether it is qualified on the production site ● Equipped with EXT I/O interface suitable for NPN/PNP, it can be used in various automatic production lines (-01)

Product Details

A simple micro resistance meter suitable for both manual and automatic production lines

Basic accuracy of 0.02%, minimum resolution of 1 μ Ω, maximum test current of 300mA
● Measurable range 0.000m μ Ω (test current 300mA)~3.5M Ω
By protecting the probes used in the port and increasing the test current, anti-interference measurement can be achieved
Using comparative judgment lights (optional) and high volume judgment sounds can accurately determine whether they are qualified or not on the production site
Equipped with EXT I/O interface suitable for NPN/PNP, it can be used in various automatic production lines (-01)

Usage of Microresistance Meter: Measurement of Winding Wire Resistance

The resistance meter RM3544 uses the 4-terminal method to measure low resistance. According to the temperature coefficient of copper wire, the measured value that has changed can be converted into the resistance value at standard temperature at room temperature, which is suitable for measuring the resistance of winding wires.

Instructions for using a micro resistance meter: comparator function

The resistance meter RM3544 will compare and judge the measured values, and display and output the results. Set the upper limit value (Hi)/lower limit value (Lo). In addition to displaying Hi, IN, and Lo through LED, the judgment result signal is also output through buzzing sound and external input/output terminals, and used as a control for relays and input for PLC. It is suitable for production lines and inspection lines.