Remote monitoring device

NegotiableUpdate on 04/21

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The XTRM remote monitoring instrument adopts advanced microprocessors for intelligent control, which is suitable for display control of various physical quantity detection signals such as temperature, humidity, pressure, liquid level, instantaneous flow rate, speed, etc. It can patrol and detect multiple measurement signals. And it can perform high-precision linear correction on various nonlinear input signals. Intelligent digital control, range can be freely set. There are two types of control outputs: each loop alarm output/remote transmission output; The highest measurement point after multi-channel comparison is used as the output (remote transmission output). Both input and output circuits adopt optoelectronic isolation, which has good anti-interference ability. It has two types: high brightness LED digital display and pointer meter display. The whole machine adopts a wall mounted structure (length, width, and height=16011070mm), which is very easy to install. This product can measure 2 to 4 measurement points simultaneously, compare the temperatures in each temperature measurement circuit, and output the highest temperature point. On site, the temperature of each point can be viewed one by one through buttons. XTRM remote monitoring instrument main technical performance: Input signal measurement channels 1-4 circuit measurement analog thermocouple: standard thermocouple - B, S, K, E, J, T, WRe, etc. Resistance: standard thermal resistance - Pt100, Cu50, Cu100, remote pressure resistance -30-350, etc. Current: 0-10mA, 4-20mA, etc. (input resistance 250) Voltage: 0-5V, 1-5V, mV, etc. (input impedance 250K) Output signal analog output DC 4-20mA (load resistance 500) DC 0-10mA (load current) .....

Product Details

XTRM remote monitoring deviceAdopting advanced microprocessors for intelligent control, it is suitable for display control of various physical quantity detection signals such as temperature, humidity, pressure, liquid level, instantaneous flow rate, and speed, and can perform cyclic detection of multiple measurement signals. And it can perform high-precision linear correction on various nonlinear input signals. Intelligent digital control, range can be freely set. There are two types of control outputs: each loop alarm output/remote transmission output; The highest measurement point after multi-channel comparison is used as the output (remote transmission output). Both input and output circuits adopt optoelectronic isolation, which has good anti-interference ability. It has two types: high brightness LED digital display and pointer meter display. The whole machine adopts a wall mounted structure (length x width x height=160 x 110 x 70mm), which is very easy to install.

This product can measure 2 to 4 measurement points simultaneously, compare the temperatures in each temperature measurement circuit, and output the highest temperature point. On site, the temperature of each point can be viewed one by one through buttons.

XTRM remote monitoring deviceMain technical performance:

input signal	Measurement channel 1～4Road patrol survey Analog thermocouple: standard thermocouple-- BTheSTheKTheETheJTheTTheWRewait Resistance: Standard thermistor-- Pt100TheCu50TheCu100Remote transmission pressure resistor-- 30～350Ωwait Current:0～10mA、4～20mAWait (input resistance)≤250Ω） Voltage:0～5V、1～5VThemVWait (input impedance)≥250KΩ）
output signal	Analog output DC 4～20mA (load resistor≤500Ω) DC 0～10mA (load resistor≤750Ω) DC 0～5V (Output resistance≤250Ω)DC 1～5V (Output resistance≤250Ω)
Characteristics	Measurement accuracy:±0.2%FSWords or±0.5%FS； Resolution digital display:±1character Display range: numerical display:-1999～9999; (or special requirements) display mode 0.8Inch high brightnessLEDDual digital display LED working status display 1～4Measurement channel number display Channel shielding and locking function display temperature compensation 0～50℃ temperature automatic compensation Parameter setting panel with touch sensitive buttons, numerical settings, parameter setting values permanently saved after power failure, password locked Protection method: Power supply under voltage, automatic reset, abnormal operation, automatic reset
Usage environment	ambient temperature -25℃～80℃ relative humidity ≤90% RH Avoid strong corrosive gases Conventional power supply voltage·AC 220V %（50Hz±2Hz, linear power supply) Special type·AC 90～265V(Switching power supply) ·DC 24V±2V

Product selection:

XTRM-( )2( )/G
number of channels	2	The number of channels is2a
	3	The number of channels is3a
	4	The number of channels is4a
Enter model number		2	thermal resistor:Pt100
temperature range			10	0～100℃
			15	0～150℃
output format				G	4～20mA
power supply				D	DC24V(Can be omitted)