Red sensitive photopolymer drying plate model: FSXJ-IV

Product Introduction

FSXJ-IVRed sensitive photopolymer printing plate is a phase type information recording medium that uses photopolymer materials and formulations to eliminate and replace environmentally unfriendly ingredients in traditional formulations. Through experiments and repeated improvements, progress has been made in multiple performance indicators.

FSXJ-IVPolymer ink drying plates are suitable for conducting information experiments in colleges, research institutes, middle schools, and other units. They are reflective information experiments and also suitable for making and processing information handicrafts, such as laser gemstones, laser jewelry, etc.

Features

1.Regarding wavelength630nm~680nmSensitive to red light, helium neon laser and red semiconductor laser can be chosen as light sources;

2.When taking an image, the entire process can be carried out under fluorescent light;

3.Low light noise, clear and clean layout.

Indicator:

Diffraction efficiency: greater than85%；

minute distinguish Rate: greater than4000L/mm(Line)/Millimeters);

spirit Min Degree:1mJ/cm²(millijoules)/Square centimeters);

Specifications and dimensions:9*24cm

Packing Specification:12piece/box

Operation Method:

The dry plate processing method after exposure is as follows:

1.Gently rinse in distilled water30second.

2.The degree is40%Dehydration in isopropanol1minute.

3.The degree is60%Dehydration in isopropanol1minute.

4.The degree is80%Dehydration in isopropanol15In seconds.

5.At a concentration of100%Dehydrate in isopropanol until a clear, bright red or yellow green image appears.

6.Take out the dry plate and quickly dry it with hot air from a hair dryer until the reproduced image becomes a clear and bright golden yellow image (for reflective images).

7.Encapsulation: Use clean glass sheets Cover the photosensitive layer, seal it with commercially available sealant, and after curing, obtain a long-term stored image sheet.