Red Pine Motor 0.75kW oil mist collector with dedicated frequency converter

Red Pine Motor 0.75kW oil mist collector with dedicated frequency converterSMX-100

Red Pine Motor 0.75kW oil mist collector with dedicated frequency converterSMX-100

赤松 SMX-100 Inverter UnitIt is specifically designed forSMX-100 / HVS-100 / SMG-100wait0.75kW level oil mist collectorA dedicated variable frequency speed control unit is provided, with the core used forFan stepless speed regulation, energy-saving operation, intelligent linkage.

1、 Core positioning and adaptation

• modelMX-100 (Akamatsu dedicated frequency conversion unit)

• Adaptive power：0.75kWThree phase asynchronous fan

• Compatible Models：

• SMX-100 (XERO Intelligent Oil Mist Machine)

• HVS-100/SMG-100/SMM-100 series oil mist collector

• core purpose：Continuous adjustment of air volume, energy saving and consumption reduction, machine tool linkage, fault protection

2、 Electrical specifications (MX-100)

1. Input/Output

• input: Three phaseAC200V/220V，50/60Hz

• output: Three phase0–200V/220V，0–50/60Hz

• Adapted motor：0.75kW three-phase asynchronous fan

• Control method：V/F control (fan specific curve)

• overload capacity：150% rated current, lasting for 60 seconds

2. Control and Interface

• speed regulation range：20–50Hz(Recommended lower limit ≥ 20Hz, windproof machine stalling)

• multi-speed：8-speed presetAdapt to different working conditions of rough/fine machining

• linkage control: Support machine toolsStart stop signal linkage(Full speed during processing, low speed/shutdown during standby)

• communication: Standard configurationRS-485（Modbus-RTU）, can be connected to PLC system

• Protection functionOvercurrent, overvoltage, overload, overheating, undervoltage, phase loss, motor stalling protection

3. Environment and Installation

• protection level：IP20(Installation inside the cabinet)

• Operating Temperature：-10℃～+50℃

• Installation method：DIN rail/wall mountedCompact design

• heat dissipationIndependent air duct, suitable for environments with high dust and oil pollution

3、 Core functions and features

1. Fan specific, efficient and energy-saving

• Optimization for centrifugal fansVLow speed torque sufficient, high-speed stability

• supportSleep/Wake upAutomatically downshift to low oil mist concentration20HzEnergy saving30%–50%

• built-inPID regulationCan be linked with an oil mist concentration sensor to achieveAutomatic air volume closed-loop control

2. Intelligent linkage, adapted to production lines

• Machine tool linkageReceive CNC signals from the machine tool and switch automaticallyFull speed/low speed/shutdown

• Timed start-stopSupport multi time scheduled operation and adapt to three shift production

• fault diagnosisLED displays fault codes (overcurrent, overvoltage, overheating, etc.) for quick troubleshooting

3. High reliability, maintenance free

• industrial-gradeIGBT moduleLong lifespan and low failure rate

• PCB boardconformal coatingHandle and adapt to oily and humid environments

• One click backup/copy of parameters, quick recovery of settings during replacement

4、 Matching effect with SMX-100 oil mist machine