| The machine has a simple structure, easy operation, long service life, stable and reliable performance, low steam consumption, strong applicability, and good product quality. It is particularly suitable for drying paste like materials that are not resistant to high temperatures, flammable, and prone to oxidation under temperature control. The machine has been proven to be a good drying equipment by users through long-term use. Principle: The dried material is added from the center of the shell, and under the stirring of the constantly rotating rake teeth, the material moves back and forth in the axial direction. The surface in contact with the inner wall of the shell is constantly updated, and is indirectly heated by steam. The uniform stirring of the rake teeth and the crushing of the crushing rod make it easier to discharge the surface moisture of the material. The vaporized moisture is discharged from the outlet of the vacuum pump through the dry dust collector, wet dust collector, and condenser. Structure: The main components of a vacuum rake dryer. |
 |
1. Shell 2, rake teeth 3, discharge device 4, feeding device 5, crushing rod
6. Sealing device 7, mixing shaft 8, transmission device |
Applicable materials
|
Mud like high paste like materials below 100 mesh, various pigments, mud like materials filtered and centrifuged, and pure alkali detergent
Alkali stone starch, dyes and pigments, clay ash, and other cement materials such as clay |
Apply under appropriate conditions
|
| Material solutions below 100 mesh include synthetic fibers, crystalline vacuum liquids, emulsions, sweet potato slices, mineral sands, and other suspensions |
Model and technical characteristics
|
| Main parameter models |
Nominal volume |
heat transfer area |
One loading |
Absolute work pressure |
operate temperature |
Spindle speed |
material |
weight |
Motor Power |
Dimensions: length x width x height |
| Inside the cylinder |
Inside the jacket |
| XPG0.5 |
0.5 |
1.86 |
0.2 |
0.021 |
0.686 |
435 |
15-20 |
|
|
Note: 3 |
|
| Auxiliary: 5.5 |
| XPG1 |
1 |
6 |
0.75 |
0.021 |
0.686 |
435 |
9 |
A3 |
3400 |
5.5 |
3700×945×3270 |
| 1Cr18Ni9Ti |
3300 |
| XPG2 |
2 |
8 |
1.2 |
0.021 |
0.588 |
425 |
9 |
A3 |
4900 |
11 |
4570×1130×3455 |
| 1Cr18Ni9Ti |
4800 |
| XPG3 |
3 |
11.5 |
11.5 |
1.021 |
0.588 |
425 |
9 |
A3 |
6400 |
15 |
6076×1130×2980 |
|
|
