RITTAL Variable Frequency Cabinet Fan SK3240.110 Price Picture

RITTAL Variable Frequency Cabinet Fan SK3240.110 Price Picture
RITTAL Variable Frequency Cabinet Fan SK3240.110 Price Picture
RITTAL Variable Frequency Cabinet Fan SK3240.110 Price Picture

Supply scope:

The filter fan has been assembled, including the filter pad.

1. Protection level: IP54/IP55/IP56,

2. EMC electromagnetic compatibility products can be selected for quick installation, including perforated templates,

3. Quick installation: card mounted, no need for screws,

4. Glue sealing ensures protection level,

5. By using a waterproof cover, it can reach IP56,

Type Cabinet Fan

Brand Weitu

Model SK3240.100

Motor power 33 (w)

Voltage 230 (V)

Current 0.18 (A)

Scope of application: Filter

Air volume 121m3/h

Blade diameter 255 * 255mm

Speed --- (r/min)

SK3240.100 Weitu Cabinet Original Fan 255 * 255mm 121m3/h

SK3240.100 Weitu cabinet fan can be used in the cabinet for ventilation and heat dissipation. The heat dissipation of the cabinet is very important. If the heat of the cabinet cannot be dispersed in time, it will seriously affect the normal operation of the cabinet; Severe cases can also damage other components. When the temperature inside the cabinet is higher than the ambient temperature, the fan will have a significant effect. Due to the fact that hot air is lighter than cold air, the air flow inside the cabinet should be from bottom to top. Therefore, in general, the air inlet should be located below the front door or side wall panel of the cabinet, and the exhaust outlet should be located above it. If the working environment is ideal and there is no dust, oil mist, or water vapor affecting the normal operation of various components in the cabinet, a fan can be installed through the air inlet; If the working environment on site is not ideal and contains dust, oil mist, water vapor that affects the normal operation of various components in the cabinet, a filter fan should be selected at the air inlet and a filter grille should be selected at the exhaust outlet to prevent dust, oil mist, water vapor, etc. from entering the electrical control cabinet. The selection of fans can be based on the difference between the temperature inside the cabinet and the ambient temperature, as well as the heat loss inside the cabinet. Fan cooling is achieved through air convection to cool down, which has the advantages of low investment and low operation.