R&S RTO1002 oscilloscope

The R&S RTO series oscilloscope from Rohde&Schwarz R&S in Germany has excellent signal fidelity, extremely high acquisition rate, and the world's first real-time digital triggering system. Its structure is compact. The R&S RTO1002 is configured with a 600GHz bandwidth and supports 2-channel colleague testing. These oscilloscopes have hardware accelerated measurement and analysis capabilities. With fast troubleshooting of signal faults, hardware accelerated analysis functions, and high-precision digital triggering system, the operation method is simpler and faster, achieving convincing measurement accuracy

One million waveforms per second: accurate troubleshooting without guessing.
The blind spot time of R&S RTO oscilloscope is extremely short, and the frequency of its sampled measurement signal is more than 20 times higher. Hardware signal processing saves time and can display results instantly.
Using R&S RTO oscilloscope for high-speed mask testing: within ten seconds,
Capable of collecting, evaluating, and displaying over six million waveforms. The world's first digital trigger achieves maximum accuracy by minimizing trigger jitter.
The digital trigger uses the same digital sampling points as the acquisition system. Unlike analog triggers,
A common time base can ensure the highest measurement accuracy. Unpacking, powering on, measuring:
Never before has an oscilloscope been so convenient.
According to preferences, users can operate using buttons, mice, or touch screens, etc
R&S RTO oscilloscope. After activating multiple graphs, Rohde&Schwarz's intelligent grid
The SmartGrid function can help users to best divide the display area. Convincing measurement accuracy
Typical inherent noise of R&S RTO1024 oscilloscope: standard deviation of histogram measurement
(S-dev) Measurement conditions: 50mV/div, resolution 100ps, no filter. Test Alpha
R&S RTO model
Basic unit bandwidth channel
R&S RTO1044 4 GHz 4
R&S RTO1024 2 GHz 4
R&S RTO1022 2 GHz 2
R&S RTO1014 1 GHz 4
R&S RTO1012 1 GHz 2
R&S RTO1004 600 MHz 4
R&S RTO1002 600 MHz 2
Performance indicators of RTO1044 digital oscilloscope

RTO1044 Digital Oscilloscope Vertical System
Input channel	R&S®RTO1002/R&S®RTO1012/R&S®RTO1022	2
	R&S®RTO1004/R&S®RTO1014/R&S®RTO1024/R&S®RTO1044	4
Bandwidth (-3 dB) at	R&S®RTO1002 and R&S®RTO1004	600 MHz
50 Ω
	R&S®RTO1012 and R&S®RTO1014	1 GHz
	R&S®RTO1022 and R&S®RTO1024	2 GHz
	R&S®RTO1044	4 GHz
Rise time (calculated value)	R&S®RTO1002 and R&S®RTO1004	583 ps
	R&S®RTO1012 and R&S®RTO1014	300 ps
	R&S®RTO1022 and R&S®RTO1024	175 ps
	R&S®RTO1044	100 ps
Input impedance		50 Ω ±1.5 %
		1 M Ω± 1% with 15 pF (measured)
Input sensitivity	Maximum bandwidth across the entire range	50 Ω: 1 mV/div to 1 V/Div
		1MΩ: 1 mV/div to 10 V/Div
Effective Bit Number (ENOB) of Analog to Digital Converter	Full range sine, frequency<-3 dB bandwidth	>7 digits (measurement)
acquisition system
Maximum sampling rate (real-time)		10 G samples per second per channel
	R&S®RTO1044	10 Gsa/s per channel
		20 Gsa/s using two channels
Memory depth	Standard configuration, with each channel/1 channel in working state	R&S®RTO: Two channel model: 20/40M sample
		R&S®RTO: Four channel model: 20/80M sample
	Maximum Upgrade (R&S)®RTO-B102 option),	R&S®RTO: Two channel model: 100/200M sample
	Each channel/1 channel is in working state	R&S®RTO: Four channel model: 100/400M sample
Maximum collection rate	Continuous collection and display, 10 G samples/s, 1 k samples	1 million waveforms per second
	Super segmentation mode	<200 ns blind spot time
Data Extraction Mode	For any combination of extraction mode and waveform algorithm, each channel can support up to 3 waveforms at most	Sampling, peak detection, high resolution, effective value
Waveform algorithm		None, envelope, average
Interpolation mode		Linear, Sin(x)/x, Sampling and preservation
Horizontal system
Time base range		25 ps/div to 50 s/div
Time base accuracy	After supply/calibration	2.5 ppm
	After supply/calibration (R&S®RTO-B4 option)	0.02 ppm
Channel offset correction		± 100 ns (real-time offset correction, channel to channel triggering - such as state detection offset correction)
Trigger system
Trigger type		Edge, interference, pulse width, under amplitude, window, timeout, interval, slope, data clock, mode, status, serial mode, I2C, SPI, Optional: UART/RS-232, LIN, CAN, FlexRay
sensitivity	Definition of Trigger Lag Parameter	Automatic or manual setting range: 0.1 div to 5 div
Detectable minimum pulse interference signal h		100 ps
	R&S®RTO1044	50 ps
Coupling mode		For the selected channel, RF suppression can be selected within the cutoff frequency range of 100 kHz to 50% of the analog bandwidth
Waveform arithmetic operation
Types of Algebraic Operations		Arithmetic operations, logical operations, comparison operations, frequency domain, digital filters
Hardware accelerated mathematical calculation function		+, –, *, 1/x, | x|, Seeking guidance, log10, ln, log2Scaling, FIR, FFT amplitude
Analysis and measurement functions
Hardware acceleration analysis function		Spectrum, histogram, template testing, cursor
Hardware accelerated measurement function		Amplitude measurement, time measurement
General data
size	Width x Height x Depth	427 mm x 249 mm x 204 mm
		(16.81 in x 9.8 in x 8.03 in)
weight	R&S®RTO1024	9.6 kg (21.16 lb)
monitor		10.4 "LC TFT color touch screen,
		1024 × 768 pixels (XGA)
connect		1Gbit/s LAN, 4xUSB 2.0, GPIB (optional), DVI (for external monitor), external trigger