Pure water hydrogen generator

Pure water hydrogen generatorThe electrolytic cell adopts the most advanced solid polymer electrolyte hydrogen production technology in the world today, which makes the oxygen content of the produced hydrogen less than 0.1ppm. It uses pure water as the electrolyte and titanium metal as the electrode. After being powered on, the cathode produces hydrogen gas and the anode produces oxygen gas. Oxygen is released, and hydrogen enters the steam water separator and is separated from water. After being fully dried in the drying tube, it is output from the outlet.

Pure water hydrogen generatorFeatures:

1. No need to add alkali, directly electrolyze pure water, green and environmentally friendly

2. International advanced SPE solid-state electrolysis technology

3. DuPont original platinum plated polymer film from the United States

4. The electrolytic cell is made of aviation titanium alloy material

5. Low water level alarm to prevent dry burning of the electrolytic cell

6. LED LCD display, gas production automation

7. The steam water separator adopts a bottom inlet method, which is three times longer than the traditional top inlet method, and the replacement time of the color changing silicone gel is extended, saving consumables

8. The shell of the soda water separator is injection molded from transparent nylon molds imported from South Korea, which are resistant to chemical reagents, high pressure, hydrolysis, and are not prone to air leakage

9. Equipped with a vent valve, it is convenient to release air every time it is turned off, avoiding vacuum siphon in the pipeline

10. Unique needle valve over water protection design ensures that even if gas is forgotten to be released, pure water will not enter precision valve components such as chromatography instruments due to pipeline vacuum, and secondary anti siphon dual safety is provided

11. Daily maintenance only requires adding distilled water

12. Optional installation of automatic water replenishment function

Technical Specifications:

Output flow rate: 0-300ml/min

Output pressure: 0-0.6Mpa (usually set to 0.3Mpa ± 0.01Mpa at the factory)

Water quality: purified water, distilled water or deionized water

Hydrogen purity: 99.99%

Power supply voltage: AC220V ± 10%

Maximum power: 150W

Dimensions: 426x210x365mm/10kg