Pulse radar level gauge, ULS52， Shanghai Automation Instrument Factory No. 5

NegotiableUpdate on 12/13

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The high-frequency crest wave pulse emitted by the guided wave radar propagates along the detection component (steel cable or steel rod) and encounters the measured medium. Due to a sudden change in dielectric constant, it causes reflection, and a portion of the pulse energy is reflected back. The time interval between the emitted pulse and the reflected pulse is proportional to the distance of the measured medium

Product Details

ULS52 Pulse Wave Radar Level Gauge

Product Introduction:ULS50Series radar level gaugeUsed for non-contact continuous measurement of liquid, slurry, and granular material levels, suitable for large temperature and pressure changes; In situations where inert gases and evaporation exist.

It adopts the measurement method of Huibo pulse and can work normally in the industrial frequency band range. The beam energy is low and can be installed in various metal and non-metal containers or pipelines, without causing harm to the human body and the environment.

feature

No blind spots

high precision

Two wire system technology

Not affected by pressure, vacuum, or temperature

Easy to install, sturdy and durable, maintenance free

Easy calibration

Fast measurement response

Suitable for vacuum and high temperature working conditions

Technical Specifications

Operating frequency: 6.3GHz

Beam angle: 24 ° ULS51, ULS52

20ULS53, ULS54 with DN150 flange

16ULS53, ULS54 with DN200 flange

14ULS53, ULS54 with DN250 flange

Measurement range: ULS51 20m, ULS52 20m, ULS53 35m, ULS54 70m

Repeatability: ± 3mm

Resolution: 1mm

Sampling: Echo sampling 44 times/s

Response speed:>0.3S (depending on specific usage)

Current signal: 4... 20mA

Accuracy:<0.1% or 10mm

Communication interface: HART communication protocol

Process connection: Thread G1 1/2A, 1 1/2NPT (plastic mounted rod antenna): ULS51

Flange DN50, DN80, DN100, DN150 (rod antenna): ULS52

Flanges DN50, DN80, DN100, DN150, DN200,

DN250(Bell shaped antenna): ULS53 ULS54

Power supply: 24VDC (± 10%), ripple voltage: 1Vpp

Power consumption: max22.5mA

Environmental temperature: -40 ℃ ..+80℃

Container pressure (gauge pressure): -1... 40 bar

Process temperature (temperature of antenna part) ULS51-40...+120 ℃

ULS52 -40...+150℃

ULS53 -40...+200℃

ULS54 -40...+200℃

Relative humidity:<95%

Explosion proof certification: Exia II CT6

Shell protection level: IP66

Two wire wiring: power supply and signal output share one two core wire

Cable entrance: 2 M20 × 1.5 (cable diameter 5... 9mm)