Protein Purification Chromatography System

　　Protein Purification Chromatography SystemIt is a small and compact protein chromatography system that integrates and compresses the system organically while ensuring the density of plunger pumps, detectors, and switching valves. It occupies an area of only 250mm × 430mm and utilizes the space of the experimental bench and freezer, making it easy for researchers to perform routine protein purification.

Product Features

For temperature sensitive samples, exquisite typeProtein Purification Chromatography SystemIt can facilitate the transportation of laboratories and chromatography refrigerators without occupying a large space.

PPSN software enables intuitive and flexible method creation, system control, and result analysis.

Mature design, stable operation, ensuring continuous and reliable protein purification process.

Product Application

Food science, biomedical research, agriculture, feed industry, pharmaceutical industry, environmental science, etc.

Product configuration and parameters

LD-PF10 is an intelligent and multi choice purification system. In addition to proteins, various biomolecules can also be rapidly purified, such as polysaccharides, peptides, oligonucleotides, nucleotide vaccines, viruses, and natural small molecules, which can be used to purify proteins ranging from micrograms to hundreds of grams.

LD-PF10 is a stable system that is used in conjunction with chromatography columns and packing materials to address purification challenges in different applications.

3. The system consists of LD-PF10 host and PPSN software. PPSN software allows for quick and easy creation of methods, control of operations, and analysis of results. PPSN software does not require professional programming skills, and the creation of tomographic methods is very simple.

4. The LD-PF10 modular protein purifier has LD-PF10 ®- 10 LD-PF10 ®- 100 LD-PF10 ®- Three flow rate configurations are available for Pilot, suitable for different scales of research and development, scale-up studies, as well as small-scale and pilot scale production. It consists of a system pump, mixer, injection valve, UV detector, and conductivity detector.

5. Product configuration and parameters

(1) System main body: power supply 100-240 V AC, 50-60 Hz, 250 × 430 × 330mm, 15Kg.

(2) Chromatography system pump: 3 plunger pumps, 0.01-50mL/min, accuracy ≤± 2%, density RSD<1%. Single pump dual inlet, low-pressure gradient mixing, gradient accuracy ≤ ± 3% (0.1-50mL/min, within the range of 5-95% B).

(3) Inlet selection valve: 6-inlet and 1-outlet rotary valve, which can increase the number of A flow path inlets to 6. optional

(4) Pressure monitor: monitors system pressure, with a pressure detection range of 0-1.0 Mpa and a fluctuation range of ± 10% FS.

(5) Automatic injection valve: 7-position rotary valve, integrated with loading, injection, and waste functions.

(6) Single wavelength UV detector: 280nm, LED light source, detection range ± 5AU, resolution 0.01mAU, linearity ± 5% (0-2AU), drift ≤ 10-3AU/H, noise ≤ 0.1mAU.

(7) Conductivity detector: Range 0-10000.00mS/cm, accuracy ± 0.01 mS/cm or ± 2%, whichever is greater. Integrated temperature sensor with temperature compensation function, temperature accuracy: ± 1 ° C.

(8) PH detector: range 0-14.00, accuracy ± 0.1 pH units (within pH 2-12 range). optional

(9) Reverse pressure valve: Provides a pressure of approximately 0.2 MPa in the system flow path to avoid the influence of gas bubbles in the mobile phase. optional

(10) Fully automatic component collector: equipped with a pipe rack that can load 100 collection tubes, with a single collection tube capacity of 15mL; optional to adapt to 2mL, 25mL, or 500mL collection tube racks. optional