Printed turbidity and suspended solids analyzer

YTUBSS-2MPrinted turbidity and suspended solids analyzertechnical indicators

1. Measurement method: Turbidity: GB13200-91 "Determination of Turbidity in Water Quality" Suspended solids: Improvement of the national standard weight method
2. Measurement range: Turbidity: 0.5-1000NTU Suspended solids: 5-500 mg/L
3. Detection limit: Turbidity: 0.5NTU Suspended solids: 5 mg/L
4. Colorimetric method: Colorimetric tube color comparison
5. Resolution: 0.001 NTU
6. Error value: ≤± 3%
7. Repeatability: ≤± 3%
8. Optical stability: less than 0.001A/20 minutes
9. Power supply: AC (220V ± 5%), 50Hz
10. Environmental temperature: 5-40 ℃ Humidity: ≤ 85% No condensation
11. Host size: 355mm * 270mm * 140mm
12. Weight: Host: 4.0kg

YTUBSS-2MPrinted turbidity and suspended solids analyzerInstrument Features

1. Fixed light path design, one click automatic switching of light source.
2. LCDLarge LCD screen (5-inch) interface design, fully Chinese operation, direct data reading, simple operation.
3. Imported cold light source, no preheating required, energy-saving, environmentally friendly, fast response, with a lifespan of up to 100000 hours and strong optical stability.
4. High quality colorimetric tube, with fewer operating steps, simple and fast measurement, and no safety hazards.
5. Built in printer that can directly print data.
6. Built in standard curve, no need for user calibration and calibration. Reserve more than 80 custom curves, which can store 2000 complete detection data, and can also be connected to a (USB) computer for unlimited storage.
7. Enable guided measurement with one click intelligent operation, simple and fast.
8. One click factory reset to prevent loss or accidental deletion of standard curves.
9. Equipped with power-off protection function to prevent data loss.
10. The equipment is not damaged by human factors, with a three-year warranty and software upgrades.