Portable ultrasonic flaw detector

Portable ultrasonic flaw detectorEquipment characteristics:

DAC and AVG curves are automatically generated, with unlimited sampling points and the ability to compensate and correct.

The frequency of the emitted pulse can be adjusted, with a maximum of 2000 times per second.

100 independent flaw detection channels, which can freely set and store multiple flaw detection processes and standards, and on-site flaw detection does not require carrying test blocks.

☆ Can process echo signals with a maximum range of 25 meters.

Real time dynamic recording and follow-up of the detection process, with a maximum cumulative recording time of 160 minutes.

☆ 5.7-inch TFT color screen display, users can customize the screen color according to their environment.

Multiple testing methods including single probe, dual probe, and penetration.

There are four detection methods: positive half wave, secondary half wave, full wave, and radio frequency.

☆ Equipped with dual gate waveform capture function.

The detection result of automatically correcting the defect position based on the diameter of the surface.

☆ Automatically measure and calculate crack depth.

Real time retrieval of the highest defect wave and recording of the maximum defect value.

☆ Perform functions such as peak trajectory depiction and peak memory on defect echoes to assist in qualitative judgment of defects.

☆ Weld seam diagram, equivalent aperture calculation and other functions.

☆ Sound and light alarms can be set for various conditions such as gates, incoming waves of curves, and loss of waves.

The main menu and sub menus are displayed in the same window. Clear at a glance, easy to operate, and convenient to find.

The main functions are quickly accessed through shortcut keys, and the shuttle spinning wheel facilitates quick adjustment of settings.

Multiple industry reports are available for selection.

The instrument comes with thickness B-scan and color B-scan.

Data can be imported into the computer through the USB 2.0 interface.

Large capacity lithium batteries can ensure a battery life of over 20 hours and can be replaced at any time.

The backup battery can be charged separately, and the host can charge the battery when it is working.

☆ It can be operated with a wristband or a handheld device, or by hanging it on the chest with a strap.

Protection level IP53, can be used in drip environments or light rain.

Portable ultrasonic flaw detectorTechnical Specifications:

Detection range: 0-25000mm

Speed range: 400-2000m/s

Gain range: 0dB -110dB

Display delay: -20 μ s -+3400 μ s

Probe zero bias: 0 μ s-99.99 μ s

Operating frequency: 0.2-20MHz

Electrical noise level: ≤ 10%

Probe damping: adjustable in 4 levels: 100 Ω, 150 Ω, 200 Ω, 500 Ω

Repetition frequency: 10-2000 Hz

Sensitivity margin:>62dB

Resolution:>40dB (5P14)

Linear inhibition: 0-80% (numerical inhibition)

Vertical linear error: ≤ 3%

Horizontal linear error value: ≤ 0.1%

Dynamic range: ≥ 32dB

Type of second wave: Square wave

Instant rush intensity: adjustable in 8 levels

Instant width: automatic matching/50-1000ns

Environmental temperature: -10 ℃ -50 ℃

Environmental humidity: 20% -95% RH

Power Supply Voltage: Direct Current (DC) 9V

Dimensions: 263 * 170 * 61 (mm)

Weight: 1.5 kg

Probe interface: Q9-Q9